Chiptuning files » Dodge » Challenger » 2008 » 6.4 V8 SRT8 (477 hp / 637 Nm)

Chiptuning files for Dodge Challenger 2008 6.4 V8 SRT8 (477 hp)

ECU: Motorola NGC4A / Siemens/Continental GPEC2 / Siemens/Continental GPEC2A / Siemens/Continental GPEC3 · TCU: ZF 8HP70

Stock
477 HPstock power
637 Nmstock torque
356 KWstock power

Tuned figures for this engine follow after we have seen your original file.

Available modifications

Engine performance

Immobiliser and cloning

What each modification does
Hardcut limiter for Dodge Challenger 6.4 V8 SRT8 (477 hp)
Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Dodge Challenger 6.4 V8 SRT8 (477 hp)
The electronic speed limiter is removed, raised or lowered.
Torque limiter off for Dodge Challenger 6.4 V8 SRT8 (477 hp)
Torque limits in the ECU or gearbox are raised so higher torque is allowed.
DTC off for Dodge Challenger 6.4 V8 SRT8 (477 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Exhaust flap control/off for Dodge Challenger 6.4 V8 SRT8 (477 hp)
Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Dodge Challenger 6.4 V8 SRT8 (477 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Dodge Challenger 6.4 V8 SRT8 (477 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
AGS off for Dodge Challenger 6.4 V8 SRT8 (477 hp)
The active grille shutters are switched off in software.
Cylinder On Demand off for Dodge Challenger 6.4 V8 SRT8 (477 hp)
Cylinder deactivation is switched off so the engine always runs on all cylinders.
Cloning (ECU/TCU) for Dodge Challenger 6.4 V8 SRT8 (477 hp)
The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Options

OptionOrdered on its own
Hardcut limiter55 to 65 credits (€77 to €91), by model year
VMAX speedlimit on/off higher/lower40 credits (€56)
DTC off45 credits (€63)
Exhaust flap control/off45 to 55 credits (€63 to €77), by model year
Catalyst off40 credits (€56)
EVAP off40 to 50 credits (€56 to €70), by model year
AGS off30 credits (€42)
Cylinder On Demand off25 credits (€35)
Cloning (ECU/TCU)199 credits (€278.60)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBoot, OBD (beta)Bench (beta), OBD
Magicmotorsport FLEXBoot, OBDBench
Alientech KESS3OBD, Boot–
Alientech PowergateOBD–
Flashtec CMDOBD, Boot–

Also listed for this vehicle: HP Tuners.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Dodge Challenger 6.4 V8 SRT8 tuning file

ECU and TCU files for the Dodge Challenger 2008 6.4 V8 SRT8 (477 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Engine code
ESG
Stock power
477 hp / 356 kW
Stock torque
637 Nm
ECU
Motorola NGC4A, Siemens/Continental GPEC2, Siemens/Continental GPEC2A, Siemens/Continental GPEC3
TCU
ZF 8HP70

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp