Chiptuning files » Mitsubishi Fuso » Canter » 2021 » 3.0 (175 hp / 430 Nm)

Chiptuning files for Mitsubishi Fuso Canter 2021 3.0 (175 hp)

ECU: Bosch MD1CS069

Stock
175 HPstock power
430 Nmstock torque
130 KWstock power

Tuned figures for this engine follow after we have seen your original file.

Available modifications

What each modification does
Stage 1 for Mitsubishi Fuso Canter 3.0 (175 hp)
Software-only remap for a truck with standard hardware.
Stage 2 BASE for Mitsubishi Fuso Canter 3.0 (175 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
VMAX speedlimit on/off higher/lower for Mitsubishi Fuso Canter 3.0 (175 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Mitsubishi Fuso Canter 3.0 (175 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Mitsubishi Fuso Canter 3.0 (175 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Mitsubishi Fuso Canter 3.0 (175 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EGR off for Mitsubishi Fuso Canter 3.0 (175 hp)
The exhaust gas recirculation valve is switched off in software.
AdBlue off for Mitsubishi Fuso Canter 3.0 (175 hp)
The SCR / AdBlue system is switched off in software.
TVA off for Mitsubishi Fuso Canter 3.0 (175 hp)
The throttle valve actuator is switched off in software.
Torque monitoring off for Mitsubishi Fuso Canter 3.0 (175 hp)
Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Readiness ok for Mitsubishi Fuso Canter 3.0 (175 hp)
Readiness monitors are set so the truck reports ready at an emission inspection.
Checksum Correction for Mitsubishi Fuso Canter 3.0 (175 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.
Fuel Saving for Mitsubishi Fuso Canter 3.0 (175 hp)
The calibration is set up for lower fuel consumption instead of maximum power.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for trucks and buses: the price for cars plus 60 credits per file. Prices are set in euro.

Tuning filePrice
Stage 1140 credits (€196)
Stage 2 BASE150 credits (€210)

Options

OptionOrdered on its ownAdded to a Stage 1 file
VMAX speedlimit on/off higher/lower100 credits (€140)included
DTC off105 credits (€147)+ 30 credits (€42)
Catalyst off100 credits (€140)+ 20 credits (€28)
DPF/OPF/GPF off110 credits (€154)+ 35 credits (€49)
EGR off105 credits (€147)+ 30 credits (€42)
AdBlue off120 credits (€168)+ 60 credits (€84)
TVA off100 credits (€140)+ 40 credits (€56)
Readiness ok105 credits (€147)+ 15 credits (€21)
Checksum Correction70 credits (€98)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench, Bench after remote unlock–
Flashtec CMDBench–
PCMflashBoot–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Mitsubishi Fuso Canter 3.0 tuning file

ECU and TCU files for the Mitsubishi Fuso Canter 2021 3.0 (175 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Stock power
175 hp / 130 kW
Stock torque
430 Nm
ECU
Bosch MD1CS069

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp