Chiptuning files » ECU and TCU » Siemens/Continental Simos 19.6 » Stage 2 BASE

Stage 2 BASE for Siemens/Continental Simos 19.6

Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.

Stage 2 BASE files for vehicles with Siemens/Continental Simos 19.6

9 of the 11 vehicles with this unit

Vehicle	Generation	Fuel	Power	Stage 2
A3 S3 2.0 TFSI (GPF)	8Y 10/2020 2023	Petrol	310 hp	433 hp / 553 Nm
S3 S TFSI (2.0T)	8Y 10/2020 2023	Petrol	310 hp	369 hp / 479 Nm
S3 S3 2.0 TFSI	8Y 10/2020 2023	Petrol	310 hp	428 hp / 548 Nm
TT 45 TFSI (2.0T) (2018 - 2020)	8S Facelift 09/2018 2023	Petrol	245 hp	322 hp / 462 Nm
TT 45 TFSI (2.0T) (2021 - 2023)	8S Facelift 09/2018 2023	Petrol	245 hp	340 hp / 470 Nm
TT S 2.0 TFSI (06/2020 - 2023)	8S Facelift 09/2018 2023	Petrol	320 hp	431 hp / 551 Nm
TT S (2.0 TFSI) (06/2020+)	8S Facelift 09/2018 2023	Petrol	320 hp	429 hp / 549 Nm
TT S S (2.0 TFSI)	8S Facelift 09/2018 2023	Petrol	320 hp	424 hp / 522 Nm
TT S S (2.0 TFSI) (06/2020+)	8S Facelift 09/2018 2023	Petrol	320 hp	427 hp / 547 Nm

Figures are indicative and depend on the vehicle’s condition, fuel quality, fitted hardware and measuring conditions.

Other modifications for Siemens/Continental Simos 19.6

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.