Chiptuning files » Cupra » Leon » 2.0 TSI (300 hp) » Stage 2 BASE

Stage 2 BASE for Cupra Leon 2.0 TSI (300 hp)

2020 2024 · ECU: Siemens/Continental Simos 19.6

StockStage 1 (+ 83 HP)Stage 2 (+ 130 HP)
+ 130 HP300 HP430 HP
+ 150 Nm400 Nm550 Nm
+ 97 KW224 KW321 KW

Figures are indicative and depend on the vehicle’s condition, fuel quality, fitted hardware and measuring conditions.

Power and torque curve

StockStage 2

Power (hp)

Torque (Nm)

Indicative curve, calculated from the stock and tuned peak figures. It is not a measured dyno run.

Show the values as a table
rpmStock hpStage 2 hpStock NmStage 2 Nm
1,0002231160220
1,5006069287329
2,000103117366416
2,500140169399482
3,000169221400525
3,500197269400547
4,000225309400550
4,500253348400550
5,000281386400550
5,500297418384541
6,000300430356510
6,500294421322462
7,000276396281402

What Stage 2 BASE does

Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.

300 hp to 430 hp and 400 Nm to 550 Nm.

Figures are indicative and depend on the vehicle’s condition, fuel quality, fitted hardware and measuring conditions.

Hardware for this engine: Exhaust system with sport catalyst, Turbo inlet pipe, Air intake, Uprated intercooler.

Gearbox tuning is not part of this file. It is a separate product: Gearbox TCU tuning.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 180 credits (€112)
Stage 2 BASE90 credits (€126)
Gearbox TCU tuning Stage 1 BASIC75 credits (€105)
Gearbox TCU tuning Stage 199 credits (€138.60)
Gearbox TCU tuning Stage 2 BASE150 credits (€210)
Gearbox TCU tuning Stage 3 BASE195 credits (€273)

Options

OptionOrdered on its ownAdded to a Stage 2 BASE file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Pops and bangs70 credits (€98)+ 40 credits (€56)
Hardcut limiter65 credits (€91)+ 55 credits (€77)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Exhaust flap control/off55 credits (€77)+ 45 credits (€63)
Catalyst off40 credits (€56)included
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
EVAP off50 credits (€70)included
AGS off30 credits (€42)included
Cloning (ECU/TCU)199 credits (€278.60)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerOBDBench, OBD
Magicmotorsport FLEXOBDBench, OBD
Alientech KESS3OBDOBD, Bench
Alientech PowergateOBD–
Flashtec CMDOBDOBD, Bench
PCMflash–OBD
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Cupra Leon 2.0 TSI tuning file

ECU and TCU files for the Cupra Leon 2020 2024 2.0 TSI (300 hp).

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Engine code
DNFC
Displacement
1984 cc
Stock power
300 hp / 224 kW
Stock torque
400 Nm
ECU
Siemens/Continental Simos 19.6
TCU
Bosch DQ381, Bosch DQ381 Gen2

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp