Chiptuning files » Volvo » XC 90 » I - Facelift 2006 2014 » 2.4 D5 (200 hp / 420 Nm)

Chiptuning files for Volvo XC 90 I - Facelift 2006 2014 2.4 D5 (200 hp)

ECU: Bosch EDC16C31 / Bosch EDC17CP48

StockStage 1 (+ 28 HP)Stage 2 (+ 33 HP)

200 HPstock power

420 Nmstock torque

149 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Volvo XC 90 2.4 D5 (200 hp): Software-only remap for a car with standard hardware. 200 hp to 228 hp and 420 Nm to 483 Nm.
Stage 2 BASE for Volvo XC 90 2.4 D5 (200 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 200 hp to 233 hp and 420 Nm to 496 Nm.
VMAX speedlimit on/off higher/lower for Volvo XC 90 2.4 D5 (200 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Volvo XC 90 2.4 D5 (200 hp): Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Volvo XC 90 2.4 D5 (200 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Volvo XC 90 2.4 D5 (200 hp): The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Volvo XC 90 2.4 D5 (200 hp): Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Volvo XC 90 2.4 D5 (200 hp): The exhaust gas recirculation valve is switched off in software.
TVA off for Volvo XC 90 2.4 D5 (200 hp): The throttle valve actuator is switched off in software.
AGS off for Volvo XC 90 2.4 D5 (200 hp): The active grille shutters are switched off in software.
Torque monitoring off for Volvo XC 90 2.4 D5 (200 hp): Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Readiness ok for Volvo XC 90 2.4 D5 (200 hp): Readiness monitors are set so the car reports ready at an emission inspection.
Hot start fix for Volvo XC 90 2.4 D5 (200 hp): Corrects hard starting with a hot engine.
IMMO_OFF for Volvo XC 90 2.4 D5 (200 hp): The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Virginize (ECU/TCU) for Volvo XC 90 2.4 D5 (200 hp): The unit is reset to an unpaired state so it can be coded to another car. A different service from IMMO_OFF.
Cloning (ECU/TCU) for Volvo XC 90 2.4 D5 (200 hp): The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Volvo XC 90 2.4 D5 (200 hp): The checksums of the file are recalculated so the control unit accepts the modified software.
Idle RPM Mod for Volvo XC 90 2.4 D5 (200 hp): The idle speed is raised or lowered; the rev limit can be changed as well.
Smoke test fix for Volvo XC 90 2.4 D5 (200 hp): The calibration is adjusted for the diesel smoke (opacity) test.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 credits (€98)
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
DPF/OPF/GPF off	50 credits (€70)	+ 35 credits (€49)
Swirl flaps off	45 credits (€63)	+ 45 credits (€63)
EGR off	35 credits (€49)	+ 30 credits (€42)
TVA off	40 credits (€56)	+ 40 credits (€56)
AGS off	30 credits (€42)	+ 30 credits (€42)
Readiness ok	45 credits (€63)	+ 15 credits (€21)
Hot start fix	35 credits (€49)	+ 35 credits (€49)
IMMO_OFF	99 credits (€138.60)	+ 99 credits (€138.60)
Virginize (ECU/TCU)	99 credits (€138.60)	–
Cloning (ECU/TCU)	199 credits (€278.60)	–
Checksum Correction	10 credits (€14)	+ 10 credits (€14)
Idle RPM Mod	45 credits (€63)	+ 45 credits (€63)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Bench	–
Magicmotorsport FLEX	Bench, Boot	–
Alientech KESS3	OBD, Bench, Boot	–
Alientech Powergate	OBD	–
Flashtec CMD	Bench, Boot, BDM	–
PCMflash	Boot	–

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.