Chiptuning files » Volvo » V40 / V40 CC » 2012 - 2015 » 1.6 T4 (180 hp / 240 Nm)

Chiptuning files for Volvo V40 / V40 CC 2012 - 2015 1.6 T4 (180 hp)

ECU: Bosch MED17.0 / Bosch MED17.2 / Denso MB279700-94xx / Denso MB279700-9560

StockStage 1 (+ 14 HP)Stage 2 (+ 24 HP)

180 HPstock power

240 Nmstock torque

134 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Volvo V40 / V40 CC 1.6 T4 (180 hp): Software-only remap for a car with standard hardware. 180 hp to 194 hp and 240 Nm to 344 Nm.
Stage 2 BASE for Volvo V40 / V40 CC 1.6 T4 (180 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 180 hp to 204 hp and 240 Nm to 344 Nm.
E85 or other special fuels modification for Volvo V40 / V40 CC 1.6 T4 (180 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Volvo V40 / V40 CC 1.6 T4 (180 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
VMAX speedlimit on/off higher/lower for Volvo V40 / V40 CC 1.6 T4 (180 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Volvo V40 / V40 CC 1.6 T4 (180 hp): Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Volvo V40 / V40 CC 1.6 T4 (180 hp): Start-stop is switched off by default.
Catalyst off for Volvo V40 / V40 CC 1.6 T4 (180 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
Readiness ok for Volvo V40 / V40 CC 1.6 T4 (180 hp): Readiness monitors are set so the car reports ready at an emission inspection.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 credits (€98)
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Start/Stop System Off	40 credits (€56)	+ 40 credits (€56)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
Readiness ok	45 credits (€63)	+ 15 credits (€21)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Bench, Boot	–
Alientech KESS3	OBD, Bench, Boot	Bench
Alientech Powergate	OBD	–
Flashtec CMD	Bench, Boot	–
PCMflash	Boot	–

Also listed for this vehicle: Alientech K-TAG, Dimsport New Trasdata, ByteShooter Toolbox.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.