Chiptuning files » Volkswagen » Polo » V Facelift (6C1) 05/2014 2017 » 1.4 TDi (90 hp / 230 Nm)

Chiptuning files for Volkswagen Polo V Facelift (6C1) 05/2014 2017 1.4 TDi (90 hp)

ECU: Delphi DCM6.2 / Delphi DCM6.2V / Siemens/Continental Simos PCR 2.1 · TCU: Temic DQ200 MQB

90 HPstock power
230 Nmstock torque
67 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Volkswagen Polo 1.4 TDi (90 hp)
Software-only remap for a car with standard hardware. 90 hp to 120 hp and 230 Nm to 285 Nm.
Stage 2 BASE for Volkswagen Polo 1.4 TDi (90 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 90 hp to 123 hp and 230 Nm to 296 Nm.
Gearbox TCU tuning for Volkswagen Polo 1.4 TDi (90 hp)
Faster shift times, modified shift points, raised torque limiters, raised rpm limits and higher clutch pressure where needed.
Launch control for Volkswagen Polo 1.4 TDi (90 hp)
Holds engine speed at a set limit while stationary so boost builds before pulling away.
VMAX speedlimit on/off higher/lower for Volkswagen Polo 1.4 TDi (90 hp)
The electronic speed limiter is removed, raised or lowered.
Torque limiter off for Volkswagen Polo 1.4 TDi (90 hp)
Torque limits in the ECU or gearbox are raised so higher torque is allowed.
DTC off for Volkswagen Polo 1.4 TDi (90 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Volkswagen Polo 1.4 TDi (90 hp)
Start-stop is switched off by default.
Exhaust flap control/off for Volkswagen Polo 1.4 TDi (90 hp)
Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Volkswagen Polo 1.4 TDi (90 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Volkswagen Polo 1.4 TDi (90 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Volkswagen Polo 1.4 TDi (90 hp)
Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Volkswagen Polo 1.4 TDi (90 hp)
The exhaust gas recirculation valve is switched off in software.
AdBlue off for Volkswagen Polo 1.4 TDi (90 hp)
The SCR / AdBlue system is switched off in software.
MAF off for Volkswagen Polo 1.4 TDi (90 hp)
The engine runs without the air mass meter signal.
TVA off for Volkswagen Polo 1.4 TDi (90 hp)
The throttle valve actuator is switched off in software.
Readiness ok for Volkswagen Polo 1.4 TDi (90 hp)
Readiness monitors are set so the car reports ready at an emission inspection.
Hot start fix for Volkswagen Polo 1.4 TDi (90 hp)
Corrects hard starting with a hot engine.
IMMO_OFF for Volkswagen Polo 1.4 TDi (90 hp)
The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for Volkswagen Polo 1.4 TDi (90 hp)
The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Volkswagen Polo 1.4 TDi (90 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.
Fuel Saving for Volkswagen Polo 1.4 TDi (90 hp)
The calibration is set up for lower fuel consumption instead of maximum power.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 170 to 80 credits (€98 to €112), by model year
Stage 2 BASE90 credits (€126)
Gearbox TCU tuning Stage 1 BASIC75 credits (€105)
Gearbox TCU tuning Stage 199 credits (€138.60)
Gearbox TCU tuning Stage 2 BASE150 credits (€210)
Gearbox TCU tuning Stage 3 BASE195 credits (€273)

Options

OptionOrdered on its ownAdded to a Stage 1 file
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Exhaust flap control/off45 to 55 credits (€63 to €77), by model year+ 45 credits (€63)
Catalyst off40 credits (€56)+ 20 credits (€28)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
Swirl flaps off45 credits (€63)+ 45 credits (€63)
EGR off35 to 45 credits (€49 to €63), by model year+ 30 credits (€42)
AdBlue off60 credits (€84)+ 60 credits (€84)
MAF off45 to 55 credits (€63 to €77), by model year–
TVA off40 credits (€56)+ 40 credits (€56)
Readiness ok45 credits (€63)+ 15 credits (€21)
Hot start fix35 to 45 credits (€49 to €63), by model year+ 35 credits (€49)
IMMO_OFF99 credits (€138.60)+ 99 credits (€138.60)
Cloning (ECU/TCU)199 credits (€278.60)–
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench, Boot, OBD–
Magicmotorsport FLEXBoot, OBDBench, OBD
Alientech KESS3OBD, Bench, BootBench
Alientech PowergateOBD–
Flashtec CMDOBD, Bench, BootOBD, Bench
PCMflashOBDOBD, Boot

Also listed for this vehicle: Alientech KESSv2, Dimsport New Genius.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Volkswagen Polo 1.4 TDi tuning file

ECU and TCU files for the Volkswagen Polo V Facelift (6C1) 05/2014 2017 1.4 TDi (90 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Engine code
CUSB / CUF
Displacement
1422 cc
Stock power
90 hp / 67 kW
Stock torque
230 Nm
ECU
Delphi DCM6.2, Delphi DCM6.2V, Siemens/Continental Simos PCR 2.1
TCU
Temic DQ200 MQB

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp