Chiptuning files » Volkswagen » Passat » B5 1996 2005 » 2.0i 20v (130 hp / 195 Nm)

Chiptuning files for Volkswagen Passat B5 1996 2005 2.0i 20v (130 hp)

ECU: Bosch ME7.5.5

130 HPstock power
195 Nmstock torque
97 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does
Stage 1 for Volkswagen Passat 2.0i 20v (130 hp)
Software-only remap for a car with standard hardware. 130 hp to 140 hp and 195 Nm to 214 Nm.
Stage 2 BASE for Volkswagen Passat 2.0i 20v (130 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
Stage 3 BASE for Volkswagen Passat 2.0i 20v (130 hp)
Remap for a larger or hybrid turbo with supporting hardware. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
Flex fuel mod for E85 or other fuel types for Volkswagen Passat 2.0i 20v (130 hp)
The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Pops and bangs for Volkswagen Passat 2.0i 20v (130 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Volkswagen Passat 2.0i 20v (130 hp)
Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Volkswagen Passat 2.0i 20v (130 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Volkswagen Passat 2.0i 20v (130 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Volkswagen Passat 2.0i 20v (130 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Volkswagen Passat 2.0i 20v (130 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Volkswagen Passat 2.0i 20v (130 hp)
The secondary air injection system is switched off in software.
Checksum Correction for Volkswagen Passat 2.0i 20v (130 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.
Anti lag for Volkswagen Passat 2.0i 20v (130 hp)
Boost is kept up when you lift off the throttle, so the turbo responds sooner when you accelerate again.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 160 credits (€84)
Stage 2 BASE90 credits (€126)
Stage 3 BASE250 credits (€350)

Options

OptionOrdered on its ownAdded to a Stage 1 file
Flex fuel mod for E85 or other fuel types150 credits (€210)+ 150 credits (€210)
Pops and bangs70 credits (€98)+ 40 credits (€56)
Hardcut limiter55 credits (€77)+ 55 credits (€77)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Catalyst off40 credits (€56)+ 20 credits (€28)
EVAP off40 credits (€56)+ 40 credits (€56)
SAI off40 credits (€56)+ 40 credits (€56)
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
Alientech KESS3OBD, Boot–
Alientech PowergateOBD–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Volkswagen Passat 2.0i 20v tuning file

ECU and TCU files for the Volkswagen Passat B5 1996 2005 2.0i 20v (130 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Engine code
ALT
Displacement
1984 cc
Stock power
130 hp / 97 kW
Stock torque
195 Nm
ECU
Bosch ME7.5.5

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp