Chiptuning files » Toyota » Urban Cruiser » 2009 - 2013 » 1.4 D4D (90 hp / 190 Nm)

Chiptuning files for Toyota Urban Cruiser 2009 - 2013 1.4 D4D (90 hp)

ECU: Bosch EDC16C10 / Bosch EDC17CP07 / Bosch EDC17CP17 / Bosch EDC17CP37

90 HPstock power
190 Nmstock torque
67 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Toyota Urban Cruiser 1.4 D4D (90 hp)
Software-only remap for a car with standard hardware. 90 hp to 119 hp and 190 Nm to 254 Nm.
Stage 2 BASE for Toyota Urban Cruiser 1.4 D4D (90 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 90 hp to 123 hp and 190 Nm to 266 Nm.
Hardcut Popcorn limiter for diesel for Toyota Urban Cruiser 1.4 D4D (90 hp)
Hard-cut rev limiter for diesel engines with the typical popcorn sound.
VMAX speedlimit on/off higher/lower for Toyota Urban Cruiser 1.4 D4D (90 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Toyota Urban Cruiser 1.4 D4D (90 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Toyota Urban Cruiser 1.4 D4D (90 hp)
Start-stop is switched off by default.
DPF/OPF/GPF off for Toyota Urban Cruiser 1.4 D4D (90 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Toyota Urban Cruiser 1.4 D4D (90 hp)
Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Toyota Urban Cruiser 1.4 D4D (90 hp)
The exhaust gas recirculation valve is switched off in software.
AdBlue off for Toyota Urban Cruiser 1.4 D4D (90 hp)
The SCR / AdBlue system is switched off in software.
TVA off for Toyota Urban Cruiser 1.4 D4D (90 hp)
The throttle valve actuator is switched off in software.
Torque monitoring off for Toyota Urban Cruiser 1.4 D4D (90 hp)
Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Readiness ok for Toyota Urban Cruiser 1.4 D4D (90 hp)
Readiness monitors are set so the car reports ready at an emission inspection.
Hot start fix for Toyota Urban Cruiser 1.4 D4D (90 hp)
Corrects hard starting with a hot engine.
IMMO_OFF for Toyota Urban Cruiser 1.4 D4D (90 hp)
The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for Toyota Urban Cruiser 1.4 D4D (90 hp)
The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 170 credits (€98)
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
Hardcut Popcorn limiter for diesel55 credits (€77)+ 40 credits (€56)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
Swirl flaps off45 credits (€63)+ 45 credits (€63)
EGR off35 credits (€49)+ 30 credits (€42)
AdBlue off60 credits (€84)+ 60 credits (€84)
TVA off40 credits (€56)+ 40 credits (€56)
Readiness ok45 credits (€63)+ 15 credits (€21)
Hot start fix35 credits (€49)+ 35 credits (€49)
IMMO_OFF99 credits (€138.60)+ 99 credits (€138.60)
Cloning (ECU/TCU)199 credits (€278.60)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench, Boot, OBD–
Magicmotorsport FLEXBench, Boot–
Alientech KESS3Bench, Boot–
Flashtec CMDBench, Boot, BDM–
PCMflashBoot–

Also listed for this vehicle: Dimsport New Trasdata, ByteShooter Toolbox.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Toyota Urban Cruiser 1.4 D4D tuning file

ECU and TCU files for the Toyota Urban Cruiser 2009 - 2013 1.4 D4D (90 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Displacement
1364 cc
Stock power
90 hp / 67 kW
Stock torque
190 Nm
ECU
Bosch EDC16C10, Bosch EDC17CP07, Bosch EDC17CP17, Bosch EDC17CP37

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp