Chiptuning files » Suzuki » Celerio » 2015 » 1.0I VVT (68 hp / 100 Nm)

Chiptuning files for Suzuki Celerio 2015 1.0I VVT (68 hp)

ECU: Bosch ME17.9.5 / Bosch ME17.9.51 / Bosch ME17.9.64

68 HPstock power
100 Nmstock torque
51 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Suzuki Celerio 1.0I VVT (68 hp)
Software-only remap for a car with standard hardware. 68 hp to 78 hp and 100 Nm to 110 Nm.
Stage 2 BASE for Suzuki Celerio 1.0I VVT (68 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 68 hp to 81 hp and 100 Nm to 115 Nm.
E85 or other special fuels modification for Suzuki Celerio 1.0I VVT (68 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Suzuki Celerio 1.0I VVT (68 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Suzuki Celerio 1.0I VVT (68 hp)
Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Suzuki Celerio 1.0I VVT (68 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Suzuki Celerio 1.0I VVT (68 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Suzuki Celerio 1.0I VVT (68 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Suzuki Celerio 1.0I VVT (68 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
Readiness ok for Suzuki Celerio 1.0I VVT (68 hp)
Readiness monitors are set so the car reports ready at an emission inspection.
IMMO_OFF for Suzuki Celerio 1.0I VVT (68 hp)
The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 170 to 80 credits (€98 to €112), by model year
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Pops and bangs70 credits (€98)+ 40 credits (€56)
Hardcut limiter55 to 65 credits (€77 to €91), by model year+ 55 credits (€77)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Catalyst off40 credits (€56)+ 20 credits (€28)
EVAP off40 to 50 credits (€56 to €70), by model year+ 40 credits (€56)
Readiness ok45 credits (€63)+ 15 credits (€21)
IMMO_OFF99 credits (€138.60)+ 99 credits (€138.60)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench, Boot, OBD (beta)–
Alientech KESS3Bench–
Flashtec CMDBench–
PCMflashBoot–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Suzuki Celerio 1.0I VVT tuning file

ECU and TCU files for the Suzuki Celerio 2015 1.0I VVT (68 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Stock power
68 hp / 51 kW
Stock torque
100 Nm
ECU
Bosch ME17.9.5, Bosch ME17.9.51, Bosch ME17.9.64

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp