Chiptuning files » Skoda » Rapid » 2012 2019 » 1.2 MPI (75 hp / 112 Nm)

Chiptuning files for Skoda Rapid 2012 2019 1.2 MPI (75 hp)

ECU: Siemens/Continental Simos 9.1

StockStage 1 (+ 15 HP)

75 HPstock power

112 Nmstock torque

56 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Skoda Rapid 1.2 MPI (75 hp): Software-only remap for a car with standard hardware. 75 hp to 90 hp and 112 Nm to 125 Nm.
Stage 2 BASE for Skoda Rapid 1.2 MPI (75 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for Skoda Rapid 1.2 MPI (75 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Flex fuel mod for E85 or other fuel types for Skoda Rapid 1.2 MPI (75 hp): The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Pops and bangs for Skoda Rapid 1.2 MPI (75 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
DTC off for Skoda Rapid 1.2 MPI (75 hp): Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Skoda Rapid 1.2 MPI (75 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Skoda Rapid 1.2 MPI (75 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Skoda Rapid 1.2 MPI (75 hp): The secondary air injection system is switched off in software.
Readiness ok for Skoda Rapid 1.2 MPI (75 hp): Readiness monitors are set so the car reports ready at an emission inspection.
IMMO_OFF for Skoda Rapid 1.2 MPI (75 hp): The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for Skoda Rapid 1.2 MPI (75 hp): The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Skoda Rapid 1.2 MPI (75 hp): The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 to 80 credits (€98 to €112), by model year
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Flex fuel mod for E85 or other fuel types	150 credits (€210)	+ 150 credits (€210)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
DTC off	45 credits (€63)	+ 30 credits (€42)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
EVAP off	40 to 50 credits (€56 to €70), by model year	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
Readiness ok	45 credits (€63)	+ 15 credits (€21)
IMMO_OFF	99 credits (€138.60)	+ 99 credits (€138.60)
Cloning (ECU/TCU)	199 credits (€278.60)	–
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Magicmotorsport FLEX	Boot	–
Alientech KESS3	OBD	–
Alientech Powergate	OBD	–
PCMflash	OBD	–

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.