Chiptuning files » Skoda » Fabia » II 2007 2014 » 1.2 HTP (60 hp / 108 Nm)

Chiptuning files for Skoda Fabia II 2007 2014 1.2 HTP (60 hp)

ECU: Bosch ME17.5.26 / Siemens/Continental Simos 9.1

StockStage 1 (+ 18 HP)

60 HPstock power

108 Nmstock torque

45 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Detuned engine: same hardware as the 1.2 70 hp, limited in software

Available modifications

What each modification does

Stage 1 for Skoda Fabia 1.2 HTP (60 hp): Software-only remap for a car with standard hardware. 60 hp to 78 hp and 108 Nm to 123 Nm.
Stage 2 BASE for Skoda Fabia 1.2 HTP (60 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for Skoda Fabia 1.2 HTP (60 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Flex fuel mod for E85 or other fuel types for Skoda Fabia 1.2 HTP (60 hp): The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Pops and bangs for Skoda Fabia 1.2 HTP (60 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Skoda Fabia 1.2 HTP (60 hp): Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Skoda Fabia 1.2 HTP (60 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Skoda Fabia 1.2 HTP (60 hp): Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Skoda Fabia 1.2 HTP (60 hp): Start-stop is switched off by default.
Exhaust flap control/off for Skoda Fabia 1.2 HTP (60 hp): Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Skoda Fabia 1.2 HTP (60 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Skoda Fabia 1.2 HTP (60 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Skoda Fabia 1.2 HTP (60 hp): The secondary air injection system is switched off in software.
Readiness ok for Skoda Fabia 1.2 HTP (60 hp): Readiness monitors are set so the car reports ready at an emission inspection.
IMMO_OFF for Skoda Fabia 1.2 HTP (60 hp): The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for Skoda Fabia 1.2 HTP (60 hp): The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Skoda Fabia 1.2 HTP (60 hp): The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 credits (€98)
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Flex fuel mod for E85 or other fuel types	150 credits (€210)	+ 150 credits (€210)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
Hardcut limiter	55 credits (€77)	+ 55 credits (€77)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Start/Stop System Off	40 credits (€56)	+ 40 credits (€56)
Exhaust flap control/off	45 credits (€63)	+ 45 credits (€63)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
EVAP off	40 credits (€56)	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
Readiness ok	45 credits (€63)	+ 15 credits (€21)
IMMO_OFF	99 credits (€138.60)	+ 99 credits (€138.60)
Cloning (ECU/TCU)	199 credits (€278.60)	–
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Magicmotorsport FLEX	Bench, Boot, OBD	–
Alientech KESS3	OBD, Boot	–
Alientech Powergate	OBD	–
Flashtec CMD	OBD, Bench, Boot	–
PCMflash	OBD, Boot	–

Also listed for this vehicle: Alientech KESSv2.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.