Chiptuning files » Renault » Twingo » 2019 2026 » 1.0 SCE (65 hp / 95 Nm)

Chiptuning files for Renault Twingo 2019 2026 1.0 SCE (65 hp)

ECU: Bosch ME17.9.20 / Siemens/Continental EMS3140 / Siemens/Continental EMS3141 / Siemens/Continental EMS3142

StockStage 1 (+ 8 HP)

65 HPstock power

95 Nmstock torque

48 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Renault Twingo 1.0 SCE (65 hp): Software-only remap for a car with standard hardware. 65 hp to 73 hp and 95 Nm to 104 Nm.
E85 or other special fuels modification for Renault Twingo 1.0 SCE (65 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
DTC off for Renault Twingo 1.0 SCE (65 hp): Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Renault Twingo 1.0 SCE (65 hp): Start-stop is switched off by default.
Catalyst off for Renault Twingo 1.0 SCE (65 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Renault Twingo 1.0 SCE (65 hp): The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EVAP off for Renault Twingo 1.0 SCE (65 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Renault Twingo 1.0 SCE (65 hp): The secondary air injection system is switched off in software.
Torque monitoring off for Renault Twingo 1.0 SCE (65 hp): Torque monitoring is relaxed so a higher torque does not trigger limp mode.
IMMO_OFF for Renault Twingo 1.0 SCE (65 hp): The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for Renault Twingo 1.0 SCE (65 hp): The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	80 credits (€112)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
DTC off	45 credits (€63)	+ 30 credits (€42)
Start/Stop System Off	40 credits (€56)	+ 40 credits (€56)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
DPF/OPF/GPF off	50 credits (€70)	+ 35 credits (€49)
EVAP off	50 credits (€70)	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
IMMO_OFF	99 credits (€138.60)	+ 99 credits (€138.60)
Cloning (ECU/TCU)	199 credits (€278.60)	–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Bench, OBD	–
Magicmotorsport FLEX	Bench, OBD	–
Flashtec CMD	OBD, Bench, Boot	–
PCMflash	Boot	–

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.