Chiptuning files » Renault » Megane » Megane 2 2002 - 2008 » 1.9 DCi (90 hp / 230 Nm)

Chiptuning files for Renault Megane Megane 2 2002 - 2008 1.9 DCi (90 hp)

ECU: Delphi DCM1.2 / Siemens/Continental SID305

StockStage 1 (+ 19 HP)

90 HPstock power

230 Nmstock torque

67 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Renault Megane 1.9 DCi (90 hp): Software-only remap for a car with standard hardware. 90 hp to 109 hp and 230 Nm to 278 Nm.
Stage 2 BASE for Renault Megane 1.9 DCi (90 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
VMAX speedlimit on/off higher/lower for Renault Megane 1.9 DCi (90 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Renault Megane 1.9 DCi (90 hp): Selected fault codes are switched off so they are no longer stored or shown.
Exhaust flap control/off for Renault Megane 1.9 DCi (90 hp): Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
DPF/OPF/GPF off for Renault Megane 1.9 DCi (90 hp): The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Renault Megane 1.9 DCi (90 hp): Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Renault Megane 1.9 DCi (90 hp): The exhaust gas recirculation valve is switched off in software.
MAF off for Renault Megane 1.9 DCi (90 hp): The engine runs without the air mass meter signal.
TVA off for Renault Megane 1.9 DCi (90 hp): The throttle valve actuator is switched off in software.
Torque monitoring off for Renault Megane 1.9 DCi (90 hp): Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Hot start fix for Renault Megane 1.9 DCi (90 hp): Corrects hard starting with a hot engine.
Virginize (ECU/TCU) for Renault Megane 1.9 DCi (90 hp): The unit is reset to an unpaired state so it can be coded to another car. A different service from IMMO_OFF.
Cloning (ECU/TCU) for Renault Megane 1.9 DCi (90 hp): The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Renault Megane 1.9 DCi (90 hp): The checksums of the file are recalculated so the control unit accepts the modified software.
Smoke test fix for Renault Megane 1.9 DCi (90 hp): The calibration is adjusted for the diesel smoke (opacity) test.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	60 to 70 credits (€84 to €98), by model year
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Exhaust flap control/off	45 credits (€63)	+ 45 credits (€63)
DPF/OPF/GPF off	50 credits (€70)	+ 35 credits (€49)
Swirl flaps off	45 credits (€63)	+ 45 credits (€63)
EGR off	35 credits (€49)	+ 30 credits (€42)
MAF off	45 credits (€63)	–
TVA off	40 credits (€56)	+ 40 credits (€56)
Hot start fix	35 credits (€49)	+ 35 credits (€49)
Virginize (ECU/TCU)	99 credits (€138.60)	–
Cloning (ECU/TCU)	199 credits (€278.60)	–
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Magicmotorsport FLEX	Boot, OBD	–
Flashtec CMD	Boot	–

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.