Chiptuning files » Renault » Kangoo / Express Van / Van » 2014 - 2021 » 1.3 TCE GPF (100 hp / 200 Nm)

Chiptuning files for Renault Kangoo / Express Van / Van 2014 - 2021 1.3 TCE GPF (100 hp)

ECU: Siemens/Continental EMS3160 / Siemens/Continental EMS3161

Stock

100 HPstock power

200 Nmstock torque

75 KWstock power

Tuned figures for this engine follow after we have seen your original file.

Available modifications

What each modification does

Stage 1 for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): Software-only remap for a car with standard hardware.
E85 or other special fuels modification for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Flex fuel mod for E85 or other fuel types for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Pops and bangs for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): Selected fault codes are switched off so they are no longer stored or shown.
Cold start off - Catalyst heating off for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Catalyst off for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EVAP off for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): The secondary air injection system is switched off in software.
Torque monitoring off for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Checksum Correction for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): The checksums of the file are recalculated so the control unit accepts the modified software.
Idle RPM Mod for Renault Kangoo / Express Van / Van 1.3 TCE GPF (100 hp): The idle speed is raised or lowered; the rev limit can be changed as well.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 to 80 credits (€98 to €112), by model year

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Flex fuel mod for E85 or other fuel types	150 credits (€210)	+ 150 credits (€210)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
Hardcut limiter	55 to 65 credits (€77 to €91), by model year	+ 55 credits (€77)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Cold start off - Catalyst heating off	50 credits (€70)	+ 50 credits (€70)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
DPF/OPF/GPF off	50 credits (€70)	+ 35 credits (€49)
EVAP off	40 to 50 credits (€56 to €70), by model year	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
Checksum Correction	10 credits (€14)	+ 10 credits (€14)
Idle RPM Mod	45 credits (€63)	+ 45 credits (€63)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Bench, OBD	–
Magicmotorsport FLEX	Bench, OBD	–
Flashtec CMD	OBD, Bench	–

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.