Chiptuning files » Renault » Kangoo / Express Van / Van » 2013 » 1.6 16V (106 hp / 148 Nm)

Chiptuning files for Renault Kangoo / Express Van / Van 2013 1.6 16V (106 hp)

ECU: Siemens/Continental EMS3110 / Siemens/Continental EMS3134

StockStage 1 (+ 18 HP)

106 HPstock power

148 Nmstock torque

79 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): Software-only remap for a car with standard hardware. 106 hp to 124 hp and 148 Nm to 161 Nm.
Stage 2 BASE for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Flex fuel mod for E85 or other fuel types for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Pops and bangs for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Launch control for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): Holds engine speed at a set limit while stationary so boost builds before pulling away.
DTC off for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): The secondary air injection system is switched off in software.
Hot start fix for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): Corrects hard starting with a hot engine.
Virginize (ECU/TCU) for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): The unit is reset to an unpaired state so it can be coded to another car. A different service from IMMO_OFF.
Cloning (ECU/TCU) for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): The checksums of the file are recalculated so the control unit accepts the modified software.
Idle RPM Mod for Renault Kangoo / Express Van / Van 1.6 16V (106 hp): The idle speed is raised or lowered; the rev limit can be changed as well.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 to 80 credits (€98 to €112), by model year
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Flex fuel mod for E85 or other fuel types	150 credits (€210)	+ 150 credits (€210)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
DTC off	45 credits (€63)	+ 30 credits (€42)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
EVAP off	40 to 50 credits (€56 to €70), by model year	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
Hot start fix	35 to 45 credits (€49 to €63), by model year	+ 35 credits (€49)
Virginize (ECU/TCU)	99 credits (€138.60)	–
Cloning (ECU/TCU)	199 credits (€278.60)	–
Checksum Correction	10 credits (€14)	+ 10 credits (€14)
Idle RPM Mod	45 credits (€63)	+ 45 credits (€63)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Boot, OBD	–
Magicmotorsport FLEX	Boot	–
Alientech KESS3	Boot	–

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.