Chiptuning files » Renault » Fluence » 2009 - 2014 » 2.0 16v (143 hp)

Chiptuning files for Renault Fluence 2009 - 2014 2.0 16v (143 hp)

ECU: Siemens/Continental EMS3110

Stock

143 HPstock power

–stock torque

107 KWstock power

Tuned figures for this engine follow after we have seen your original file.

Available modifications

What each modification does

Stage 1 for Renault Fluence 2.0 16v (143 hp): Software-only remap for a car with standard hardware.
Flex fuel mod for E85 or other fuel types for Renault Fluence 2.0 16v (143 hp): The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Pops and bangs for Renault Fluence 2.0 16v (143 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Launch control for Renault Fluence 2.0 16v (143 hp): Holds engine speed at a set limit while stationary so boost builds before pulling away.
DTC off for Renault Fluence 2.0 16v (143 hp): Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Renault Fluence 2.0 16v (143 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
Hot start fix for Renault Fluence 2.0 16v (143 hp): Corrects hard starting with a hot engine.
Cloning (ECU/TCU) for Renault Fluence 2.0 16v (143 hp): The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Renault Fluence 2.0 16v (143 hp): The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 credits (€98)

Options

Option	Ordered on its own	Added to a Stage 1 file
Flex fuel mod for E85 or other fuel types	150 credits (€210)	+ 150 credits (€210)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
DTC off	45 credits (€63)	+ 30 credits (€42)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
Hot start fix	35 credits (€49)	+ 35 credits (€49)
Cloning (ECU/TCU)	199 credits (€278.60)	–
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Alientech KESS3	OBD, Boot	–
Alientech Powergate	OBD	–

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.