Chiptuning files » Renault » Fluence » 2009 - 2014 » 1.5L dCi (89 hp / 220 Nm)

Chiptuning files for Renault Fluence 2009 - 2014 1.5L dCi (89 hp)

ECU: Delphi DCM3.4 / Siemens/Continental SID306

Stock
89 HPstock power
220 Nmstock torque
66 KWstock power

Tuned figures for this engine follow after we have seen your original file.

Available modifications

Engine performance

Immobiliser and cloning

What each modification does
Stage 1 for Renault Fluence 1.5L dCi (89 hp)
Software-only remap for a car with standard hardware.
Stage 2 BASE for Renault Fluence 1.5L dCi (89 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
VMAX speedlimit on/off higher/lower for Renault Fluence 1.5L dCi (89 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Renault Fluence 1.5L dCi (89 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Exhaust flap control/off for Renault Fluence 1.5L dCi (89 hp)
Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
DPF/OPF/GPF off for Renault Fluence 1.5L dCi (89 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Renault Fluence 1.5L dCi (89 hp)
Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Renault Fluence 1.5L dCi (89 hp)
The exhaust gas recirculation valve is switched off in software.
AdBlue off for Renault Fluence 1.5L dCi (89 hp)
The SCR / AdBlue system is switched off in software.
TVA off for Renault Fluence 1.5L dCi (89 hp)
The throttle valve actuator is switched off in software.
Hot start fix for Renault Fluence 1.5L dCi (89 hp)
Corrects hard starting with a hot engine.
Cloning (ECU/TCU) for Renault Fluence 1.5L dCi (89 hp)
The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Renault Fluence 1.5L dCi (89 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.
Smoke test fix for Renault Fluence 1.5L dCi (89 hp)
The calibration is adjusted for the diesel smoke (opacity) test.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 170 credits (€98)
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Exhaust flap control/off45 credits (€63)+ 45 credits (€63)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
Swirl flaps off45 credits (€63)+ 45 credits (€63)
EGR off35 credits (€49)+ 30 credits (€42)
AdBlue off60 credits (€84)+ 60 credits (€84)
TVA off40 credits (€56)+ 40 credits (€56)
Hot start fix35 credits (€49)+ 35 credits (€49)
Cloning (ECU/TCU)199 credits (€278.60)–
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerOBD–
Magicmotorsport FLEXBoot, OBD–
Alientech KESS3OBD, Boot–
Alientech PowergateOBD–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Renault Fluence 1.5L dCi tuning file

ECU and TCU files for the Renault Fluence 2009 - 2014 1.5L dCi (89 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Displacement
1461 cc
Stock power
89 hp / 66 kW
Stock torque
220 Nm
ECU
Delphi DCM3.4, Siemens/Continental SID306

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp