Chiptuning files » Renault » Austral » 2022 » 1.3 TCE 140 MHEV (140 hp / 240 Nm)

Chiptuning files for Renault Austral 2022 1.3 TCE 140 MHEV (140 hp)

ECU: Siemens/Continental EMS3161 · TCU: Getrag 7DCT300

StockStage 1 (+ 24 HP)

140 HPstock power

240 Nmstock torque

104 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Renault Austral 1.3 TCE 140 MHEV (140 hp): Software-only remap for a car with standard hardware. 140 hp to 164 hp and 240 Nm to 297 Nm.
E85 or other special fuels modification for Renault Austral 1.3 TCE 140 MHEV (140 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Renault Austral 1.3 TCE 140 MHEV (140 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
VMAX speedlimit on/off higher/lower for Renault Austral 1.3 TCE 140 MHEV (140 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Renault Austral 1.3 TCE 140 MHEV (140 hp): Selected fault codes are switched off so they are no longer stored or shown.
Cold start off - Catalyst heating off for Renault Austral 1.3 TCE 140 MHEV (140 hp): The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Catalyst off for Renault Austral 1.3 TCE 140 MHEV (140 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Renault Austral 1.3 TCE 140 MHEV (140 hp): The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EVAP off for Renault Austral 1.3 TCE 140 MHEV (140 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
Torque monitoring off for Renault Austral 1.3 TCE 140 MHEV (140 hp): Torque monitoring is relaxed so a higher torque does not trigger limp mode.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	80 credits (€112)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Cold start off - Catalyst heating off	50 credits (€70)	+ 50 credits (€70)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
DPF/OPF/GPF off	50 credits (€70)	+ 35 credits (€49)
EVAP off	50 credits (€70)	+ 40 credits (€56)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Bench, OBD	Bench (beta), OBD
Magicmotorsport FLEX	Bench, OBD	–
Alientech KESS3	OBD, Bench	–
Flashtec CMD	OBD, Bench	Bench

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.