Chiptuning files » Porsche » 911 » 997 2004 2010 » Carrera / 4 3.6 DFI (345 hp / 390 Nm)

Chiptuning files for Porsche 911 997 2004 2010 Carrera / 4 3.6 DFI (345 hp)

ECU: Siemens/Continental SDI3

345 HPstock power
390 Nmstock torque
257 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does
Stage 1 for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
Software-only remap for a car with standard hardware. 345 hp to 355 hp and 390 Nm to 405 Nm.
Stage 2 BASE for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 345 hp to 378 hp and 390 Nm to 433 Nm.
Pops and bangs for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
VMAX speedlimit on/off higher/lower for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
Start-stop is switched off by default.
Cold start off - Catalyst heating off for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Catalyst off for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
The secondary air injection system is switched off in software.
Checksum Correction for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.
Oil Pressure Mod for Porsche 911 Carrera / 4 3.6 DFI (345 hp)
The oil pressure map is raised, for engines with a map-controlled oil pump.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 160 to 70 credits (€84 to €98), by model year
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
Pops and bangs70 credits (€98)+ 40 credits (€56)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Cold start off - Catalyst heating off50 credits (€70)+ 50 credits (€70)
Catalyst off40 credits (€56)+ 20 credits (€28)
EVAP off40 credits (€56)+ 40 credits (€56)
SAI off40 credits (€56)+ 40 credits (€56)
Checksum Correction10 credits (€14)+ 10 credits (€14)
Oil Pressure Mod80 credits (€112)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerOBD–
Alientech KESS3OBD, BootBoot
Alientech PowergateOBD–

Also listed for this vehicle: Alientech KESSv2, Flashtec CMD, Dimsport New Genius.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Porsche 911 Carrera / 4 3.6 DFI tuning file

ECU and TCU files for the Porsche 911 997 2004 2010 Carrera / 4 3.6 DFI (345 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Displacement
3596 cc
Stock power
345 hp / 257 kW
Stock torque
390 Nm
ECU
Siemens/Continental SDI3

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp