Chiptuning files » Porsche » 911 » 991 Facelift 2016 2018 » Turbo S 3.8T (580 hp / 700 Nm)

Chiptuning files for Porsche 911 991 Facelift 2016 2018 Turbo S 3.8T (580 hp)

ECU: Siemens/Continental SDI21.3 · TCU: Siemens/Continental PDK4000

580 HPstock power
700 Nmstock torque
433 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Stage 2+ option (700 hp / 870 Nm): Full exhaust system, Sport air filter (e.g. BMC), Air intake, ?IPD High Flow Y Pipe, Uprated intercooler, ?Installation des pièces

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Porsche 911 Turbo S 3.8T (580 hp)
Software-only remap for a car with standard hardware. 580 hp to 652 hp and 700 Nm to 822 Nm.
Stage 2 BASE for Porsche 911 Turbo S 3.8T (580 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 580 hp to 684 hp and 700 Nm to 854 Nm.
Stage 3 BASE for Porsche 911 Turbo S 3.8T (580 hp)
Remap for a larger or hybrid turbo with supporting hardware. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 580 hp to 884 hp and 700 Nm to 938 Nm.
E85 or other special fuels modification for Porsche 911 Turbo S 3.8T (580 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Flex fuel mod for E85 or other fuel types for Porsche 911 Turbo S 3.8T (580 hp)
The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Gearbox TCU tuning for Porsche 911 Turbo S 3.8T (580 hp)
Faster shift times, modified shift points, raised torque limiters, raised rpm limits and higher clutch pressure where needed.
Pops and bangs for Porsche 911 Turbo S 3.8T (580 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Porsche 911 Turbo S 3.8T (580 hp)
Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Porsche 911 Turbo S 3.8T (580 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Porsche 911 Turbo S 3.8T (580 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Porsche 911 Turbo S 3.8T (580 hp)
Start-stop is switched off by default.
Cold start off - Catalyst heating off for Porsche 911 Turbo S 3.8T (580 hp)
The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Catalyst off for Porsche 911 Turbo S 3.8T (580 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Porsche 911 Turbo S 3.8T (580 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Porsche 911 Turbo S 3.8T (580 hp)
The secondary air injection system is switched off in software.
AGS off for Porsche 911 Turbo S 3.8T (580 hp)
The active grille shutters are switched off in software.
Torque monitoring off for Porsche 911 Turbo S 3.8T (580 hp)
Torque monitoring is relaxed so a higher torque does not trigger limp mode.
RPM Limit Mod for Porsche 911 Turbo S 3.8T (580 hp)
The engine speed limit is raised or lowered.
Cloning (ECU/TCU) for Porsche 911 Turbo S 3.8T (580 hp)
The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Porsche 911 Turbo S 3.8T (580 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.
Idle RPM Mod for Porsche 911 Turbo S 3.8T (580 hp)
The idle speed is raised or lowered; the rev limit can be changed as well.
Oil Pressure Mod for Porsche 911 Turbo S 3.8T (580 hp)
The oil pressure map is raised, for engines with a map-controlled oil pump.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 180 credits (€112)
Stage 2 BASE90 credits (€126)
Stage 3 BASE250 credits (€350)
Gearbox TCU tuning Stage 1 BASIC75 credits (€105)
Gearbox TCU tuning Stage 199 credits (€138.60)
Gearbox TCU tuning Stage 2 BASE150 credits (€210)
Gearbox TCU tuning Stage 3 BASE195 credits (€273)

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Flex fuel mod for E85 or other fuel types150 credits (€210)+ 150 credits (€210)
Pops and bangs70 credits (€98)+ 40 credits (€56)
Hardcut limiter65 credits (€91)+ 55 credits (€77)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Cold start off - Catalyst heating off50 credits (€70)+ 50 credits (€70)
Catalyst off40 credits (€56)+ 20 credits (€28)
EVAP off50 credits (€70)+ 40 credits (€56)
SAI off40 credits (€56)+ 40 credits (€56)
AGS off30 credits (€42)+ 30 credits (€42)
RPM Limit Mod45 credits (€63)included
Cloning (ECU/TCU)199 credits (€278.60)–
Checksum Correction10 credits (€14)+ 10 credits (€14)
Idle RPM Mod45 credits (€63)+ 45 credits (€63)
Oil Pressure Mod80 credits (€112)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBoot, OBD–
Magicmotorsport FLEXBootBoot, OBD
Alientech KESS3OBD, BootBoot
Alientech PowergateOBD–
Flashtec CMDOBD, Boot–

Also listed for this vehicle: Alientech KESSv2, Dimsport New Genius, Dimsport New Trasdata, bFlash, ByteShooter Toolbox.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Porsche 911 Turbo S 3.8T tuning file

ECU and TCU files for the Porsche 911 991 Facelift 2016 2018 Turbo S 3.8T (580 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Engine code
DBC / DBCA
Displacement
3800 cc
Stock power
580 hp / 433 kW
Stock torque
700 Nm
ECU
Siemens/Continental SDI21.3
TCU
Siemens/Continental PDK4000

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp