Chiptuning files » Peugeot » Partner » 2015 » 1.6 16v (110 hp / 147 Nm)

Chiptuning files for Peugeot Partner 2015 1.6 16v (110 hp)

StockStage 1 (+ 8 HP)

110 HPstock power

147 Nmstock torque

82 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Peugeot Partner 1.6 16v (110 hp): Software-only remap for a car with standard hardware. 110 hp to 118 hp and 147 Nm to 158 Nm.
Stage 2 BASE for Peugeot Partner 1.6 16v (110 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for Peugeot Partner 1.6 16v (110 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Flex fuel mod for E85 or other fuel types for Peugeot Partner 1.6 16v (110 hp): The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
VMAX speedlimit on/off higher/lower for Peugeot Partner 1.6 16v (110 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Peugeot Partner 1.6 16v (110 hp): Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Peugeot Partner 1.6 16v (110 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
SAI off for Peugeot Partner 1.6 16v (110 hp): The secondary air injection system is switched off in software.
Checksum Correction for Peugeot Partner 1.6 16v (110 hp): The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 to 80 credits (€98 to €112), by model year
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Flex fuel mod for E85 or other fuel types	150 credits (€210)	+ 150 credits (€210)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
SAI off	40 credits (€56)	+ 40 credits (€56)
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.