Chiptuning files » Opel » Combo » 2018 2022 » 1.5 BlueHDi (130 hp / 300 Nm)

Chiptuning files for Opel Combo 2018 2022 1.5 BlueHDi (130 hp)

ECU: Bosch MD1CS003

StockStage 1 (+ 29 HP)

130 HPstock power

300 Nmstock torque

97 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Opel Combo 1.5 BlueHDi (130 hp): Software-only remap for a car with standard hardware. 130 hp to 159 hp and 300 Nm to 349 Nm.
VMAX speedlimit on/off higher/lower for Opel Combo 1.5 BlueHDi (130 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Opel Combo 1.5 BlueHDi (130 hp): Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Opel Combo 1.5 BlueHDi (130 hp): Start-stop is switched off by default.
Catalyst off for Opel Combo 1.5 BlueHDi (130 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Opel Combo 1.5 BlueHDi (130 hp): The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Opel Combo 1.5 BlueHDi (130 hp): Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Opel Combo 1.5 BlueHDi (130 hp): The exhaust gas recirculation valve is switched off in software.
AdBlue off for Opel Combo 1.5 BlueHDi (130 hp): The SCR / AdBlue system is switched off in software.
TVA off for Opel Combo 1.5 BlueHDi (130 hp): The throttle valve actuator is switched off in software.
AGS off for Opel Combo 1.5 BlueHDi (130 hp): The active grille shutters are switched off in software.
Torque monitoring off for Opel Combo 1.5 BlueHDi (130 hp): Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Readiness ok for Opel Combo 1.5 BlueHDi (130 hp): Readiness monitors are set so the car reports ready at an emission inspection.
CVN correction for Opel Combo 1.5 BlueHDi (130 hp): The calibration verification number is corrected so it matches the modified software.
Checksum Correction for Opel Combo 1.5 BlueHDi (130 hp): The checksums of the file are recalculated so the control unit accepts the modified software.
Smoke test fix for Opel Combo 1.5 BlueHDi (130 hp): The calibration is adjusted for the diesel smoke (opacity) test.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	80 credits (€112)

Options

Option	Ordered on its own	Added to a Stage 1 file
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Start/Stop System Off	40 credits (€56)	+ 40 credits (€56)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
DPF/OPF/GPF off	50 credits (€70)	+ 35 credits (€49)
Swirl flaps off	45 credits (€63)	+ 45 credits (€63)
EGR off	45 credits (€63)	+ 30 credits (€42)
AdBlue off	60 credits (€84)	+ 60 credits (€84)
TVA off	40 credits (€56)	+ 40 credits (€56)
AGS off	30 credits (€42)	+ 30 credits (€42)
Readiness ok	45 credits (€63)	+ 15 credits (€21)
CVN correction	25 credits (€35)	+ 25 credits (€35)
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Magicmotorsport FLEX	Bench	–
Alientech KESS3	Bench, Boot	–
Flashtec CMD	Bench	–
PCMflash	Boot	–

Also listed for this vehicle: Dimsport New Trasdata.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.