Chiptuning files » Mini » Countryman » U25 2024 » 2.0D (163 hp / 360 Nm)

Chiptuning files for Mini Countryman U25 2024 2.0D (163 hp)

ECU: Bosch MD1CS015

163 HPstock power
360 Nmstock torque
122 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Engine performance

What each modification does
Stage 1 for Mini Countryman 2.0D (163 hp)
Software-only remap for a car with standard hardware. 163 hp to 189 hp and 360 Nm to 417 Nm.
Stage 2 BASE for Mini Countryman 2.0D (163 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
Gearbox TCU tuning for Mini Countryman 2.0D (163 hp)
Faster shift times, modified shift points, raised torque limiters, raised rpm limits and higher clutch pressure where needed.
Sport displays calibration for Mini Countryman 2.0D (163 hp)
The power and torque displays are recalibrated to the tuned values.
VMAX speedlimit on/off higher/lower for Mini Countryman 2.0D (163 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Mini Countryman 2.0D (163 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Mini Countryman 2.0D (163 hp)
Start-stop is switched off by default.
DPF/OPF/GPF off for Mini Countryman 2.0D (163 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Mini Countryman 2.0D (163 hp)
Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Mini Countryman 2.0D (163 hp)
The exhaust gas recirculation valve is switched off in software.
AdBlue off for Mini Countryman 2.0D (163 hp)
The SCR / AdBlue system is switched off in software.
Readiness ok for Mini Countryman 2.0D (163 hp)
Readiness monitors are set so the car reports ready at an emission inspection.
CVN correction for Mini Countryman 2.0D (163 hp)
The calibration verification number is corrected so it matches the modified software.
Checksum Correction for Mini Countryman 2.0D (163 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 180 credits (€112)
Stage 2 BASE90 credits (€126)
Gearbox TCU tuning Stage 1 BASIC75 credits (€105)
Gearbox TCU tuning Stage 199 credits (€138.60)
Gearbox TCU tuning Stage 2 BASE150 credits (€210)
Gearbox TCU tuning Stage 3 BASE195 credits (€273)

Options

OptionOrdered on its ownAdded to a Stage 1 file
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
Swirl flaps off45 credits (€63)+ 45 credits (€63)
EGR off45 credits (€63)+ 30 credits (€42)
AdBlue off60 credits (€84)+ 60 credits (€84)
Readiness ok45 credits (€63)+ 15 credits (€21)
CVN correction25 credits (€35)+ 25 credits (€35)
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench after remote unlock–
PCMflashBoot–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Mini Countryman 2.0D tuning file

ECU and TCU files for the Mini Countryman U25 2024 2.0D (163 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Stock power
163 hp / 122 kW
Stock torque
360 Nm
ECU
Bosch MD1CS015

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp