Chiptuning files » Mercedes-Benz » GLE / GLE Coupé » W166 2015 - 2019 » 500 E (449 hp / 650 Nm)

Chiptuning files for Mercedes-Benz GLE / GLE Coupé W166 2015 - 2019 500 E (449 hp)

ECU: Bosch MED17.7.3.1 · TCU: Bosch 9G-Tronic VGS-NAG3

449 HPstock power
650 Nmstock torque
335 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
Software-only remap for a car with standard hardware. 449 hp to 541 hp and 650 Nm to 781 Nm.
Stage 2 BASE for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
VMAX speedlimit on/off higher/lower for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
Start-stop is switched off by default.
Cold start off - Catalyst heating off for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Catalyst off for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
The secondary air injection system is switched off in software.
Torque monitoring off for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Readiness ok for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
Readiness monitors are set so the car reports ready at an emission inspection.
RPM Limit Mod for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
The engine speed limit is raised or lowered.
IMMO_OFF for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for Mercedes-Benz GLE / GLE Coupé 500 E (449 hp)
The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 170 to 80 credits (€98 to €112), by model year
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Pops and bangs70 credits (€98)+ 40 credits (€56)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Cold start off - Catalyst heating off50 credits (€70)+ 50 credits (€70)
Catalyst off40 credits (€56)+ 20 credits (€28)
EVAP off40 to 50 credits (€56 to €70), by model year+ 40 credits (€56)
SAI off40 credits (€56)+ 40 credits (€56)
Readiness ok45 credits (€63)+ 15 credits (€21)
RPM Limit Mod45 credits (€63)included
IMMO_OFF99 credits (€138.60)+ 99 credits (€138.60)
Cloning (ECU/TCU)199 credits (€278.60)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench, Boot, OBDBench, OBD
Flashtec CMDOBD, Bench, BootBench
PCMflashOBD, Boot–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Mercedes-Benz GLE / GLE Coupé 500 E tuning file

ECU and TCU files for the Mercedes-Benz GLE / GLE Coupé W166 2015 - 2019 500 E (449 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Engine code
M276
Displacement
2996 cc
Stock power
449 hp / 335 kW
Stock torque
650 Nm
ECU
Bosch MED17.7.3.1
TCU
Bosch 9G-Tronic VGS-NAG3

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp