Chiptuning files » Mercedes-Benz » B » W246 2012 - 2018 » 160 CDI (90 hp / 240 Nm)

Chiptuning files for Mercedes-Benz B W246 2012 - 2018 160 CDI (90 hp)

ECU: Siemens/Continental SID307 / Siemens/Continental SID310

90 HPstock power
240 Nmstock torque
67 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Detuned engine: same hardware as the 180D (1.5D) 109 hp, limited in software

Available modifications

What each modification does
Stage 1 for Mercedes-Benz B 160 CDI (90 hp)
Software-only remap for a car with standard hardware. 90 hp to 135 hp and 240 Nm to 308 Nm.
Stage 2 BASE for Mercedes-Benz B 160 CDI (90 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 90 hp to 138 hp and 240 Nm to 354 Nm.
VMAX speedlimit on/off higher/lower for Mercedes-Benz B 160 CDI (90 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Mercedes-Benz B 160 CDI (90 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Mercedes-Benz B 160 CDI (90 hp)
Start-stop is switched off by default.
Exhaust flap control/off for Mercedes-Benz B 160 CDI (90 hp)
Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
DPF/OPF/GPF off for Mercedes-Benz B 160 CDI (90 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Mercedes-Benz B 160 CDI (90 hp)
Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Mercedes-Benz B 160 CDI (90 hp)
The exhaust gas recirculation valve is switched off in software.
AdBlue off for Mercedes-Benz B 160 CDI (90 hp)
The SCR / AdBlue system is switched off in software.
TVA off for Mercedes-Benz B 160 CDI (90 hp)
The throttle valve actuator is switched off in software.
Torque monitoring off for Mercedes-Benz B 160 CDI (90 hp)
Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Hot start fix for Mercedes-Benz B 160 CDI (90 hp)
Corrects hard starting with a hot engine.
Checksum Correction for Mercedes-Benz B 160 CDI (90 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.
Smoke test fix for Mercedes-Benz B 160 CDI (90 hp)
The calibration is adjusted for the diesel smoke (opacity) test.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 170 to 80 credits (€98 to €112), by model year
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Exhaust flap control/off45 to 55 credits (€63 to €77), by model year+ 45 credits (€63)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
Swirl flaps off45 credits (€63)+ 45 credits (€63)
EGR off35 to 45 credits (€49 to €63), by model year+ 30 credits (€42)
AdBlue off60 credits (€84)+ 60 credits (€84)
TVA off40 credits (€56)+ 40 credits (€56)
Hot start fix35 to 45 credits (€49 to €63), by model year+ 35 credits (€49)
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBoot, OBD–
Magicmotorsport FLEXBench, Boot, OBD–
Alientech KESS3OBD, Boot–
Alientech PowergateOBD–
Flashtec CMDOBD, Boot–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Mercedes-Benz B 160 CDI tuning file

ECU and TCU files for the Mercedes-Benz B W246 2012 - 2018 160 CDI (90 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Engine code
OM607
Displacement
1461 cc
Stock power
90 hp / 67 kW
Stock torque
240 Nm
ECU
Siemens/Continental SID307, Siemens/Continental SID310

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp