Chiptuning files » Mercedes-Benz » A / A Berline » W177 05/2018-10/2022 » 200 (163 hp / 250 Nm)

Chiptuning files for Mercedes-Benz A / A Berline W177 05/2018-10/2022 200 (163 hp)

ECU: Bosch MG1CP002 / Bosch MG1CS701 / Siemens/Continental EMS71

163 HPstock power
250 Nmstock torque
122 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does
Stage 1 for Mercedes-Benz A / A Berline 200 (163 hp)
Software-only remap for a car with standard hardware. 163 hp to 172 hp and 250 Nm to 297 Nm.
E85 or other special fuels modification for Mercedes-Benz A / A Berline 200 (163 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Mercedes-Benz A / A Berline 200 (163 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
VMAX speedlimit on/off higher/lower for Mercedes-Benz A / A Berline 200 (163 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Mercedes-Benz A / A Berline 200 (163 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Mercedes-Benz A / A Berline 200 (163 hp)
Start-stop is switched off by default.
Cold start off - Catalyst heating off for Mercedes-Benz A / A Berline 200 (163 hp)
The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Catalyst off for Mercedes-Benz A / A Berline 200 (163 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Mercedes-Benz A / A Berline 200 (163 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EVAP off for Mercedes-Benz A / A Berline 200 (163 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
AGS off for Mercedes-Benz A / A Berline 200 (163 hp)
The active grille shutters are switched off in software.
Torque monitoring off for Mercedes-Benz A / A Berline 200 (163 hp)
Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Readiness ok for Mercedes-Benz A / A Berline 200 (163 hp)
Readiness monitors are set so the car reports ready at an emission inspection.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 180 credits (€112)

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Pops and bangs70 credits (€98)+ 40 credits (€56)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Cold start off - Catalyst heating off50 credits (€70)+ 50 credits (€70)
Catalyst off40 credits (€56)+ 20 credits (€28)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
EVAP off50 credits (€70)+ 40 credits (€56)
AGS off30 credits (€42)+ 30 credits (€42)
Readiness ok45 credits (€63)+ 15 credits (€21)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench after remote unlock–
Magicmotorsport FLEXBench–
Flashtec CMDBench–
PCMflashBoot–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Mercedes-Benz A / A Berline 200 tuning file

ECU and TCU files for the Mercedes-Benz A / A Berline W177 05/2018-10/2022 200 (163 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Engine code
M282 / M285
Displacement
1332 cc
Stock power
163 hp / 122 kW
Stock torque
250 Nm
ECU
Bosch MG1CP002, Bosch MG1CS701, Siemens/Continental EMS71

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp