Chiptuning files » Mercedes-Benz » A / A Berline » W168 1997 - 2004 » 170 CDI (90 hp / 180 Nm)

Chiptuning files for Mercedes-Benz A / A Berline W168 1997 - 2004 170 CDI (90 hp)

ECU: Bosch EDC15C0

90 HPstock power
180 Nmstock torque
67 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Mercedes-Benz A / A Berline 170 CDI (90 hp)
Software-only remap for a car with standard hardware. 90 hp to 109 hp and 180 Nm to 226 Nm.
Stage 2 BASE for Mercedes-Benz A / A Berline 170 CDI (90 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 90 hp to 123 hp and 180 Nm to 246 Nm.
VMAX speedlimit on/off higher/lower for Mercedes-Benz A / A Berline 170 CDI (90 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Mercedes-Benz A / A Berline 170 CDI (90 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Swirl flaps off for Mercedes-Benz A / A Berline 170 CDI (90 hp)
Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Mercedes-Benz A / A Berline 170 CDI (90 hp)
The exhaust gas recirculation valve is switched off in software.
AdBlue off for Mercedes-Benz A / A Berline 170 CDI (90 hp)
The SCR / AdBlue system is switched off in software.
MAF off for Mercedes-Benz A / A Berline 170 CDI (90 hp)
The engine runs without the air mass meter signal.
TVA off for Mercedes-Benz A / A Berline 170 CDI (90 hp)
The throttle valve actuator is switched off in software.
Virginize (ECU/TCU) for Mercedes-Benz A / A Berline 170 CDI (90 hp)
The unit is reset to an unpaired state so it can be coded to another car. A different service from IMMO_OFF.
Checksum Correction for Mercedes-Benz A / A Berline 170 CDI (90 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.
Smoke test fix for Mercedes-Benz A / A Berline 170 CDI (90 hp)
The calibration is adjusted for the diesel smoke (opacity) test.
Fuel Saving for Mercedes-Benz A / A Berline 170 CDI (90 hp)
The calibration is set up for lower fuel consumption instead of maximum power.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 160 credits (€84)
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Swirl flaps off45 credits (€63)+ 45 credits (€63)
EGR off35 credits (€49)+ 30 credits (€42)
AdBlue off60 credits (€84)+ 60 credits (€84)
MAF off45 credits (€63)–
TVA off40 credits (€56)+ 40 credits (€56)
Virginize (ECU/TCU)99 credits (€138.60)–
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerOBD–
Alientech KESS3OBD–
Alientech PowergateOBD–

Also listed for this vehicle: Alientech KESSv2.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Mercedes-Benz A / A Berline 170 CDI tuning file

ECU and TCU files for the Mercedes-Benz A / A Berline W168 1997 - 2004 170 CDI (90 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Engine code
OM668
Displacement
1689 cc
Stock power
90 hp / 67 kW
Stock torque
180 Nm
ECU
Bosch EDC15C0

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp