Chiptuning files » Jaguar » E-Pace » Facelift 2020 2024 » P300e PHEV (1.5T) (309 hp / 540 Nm)

Chiptuning files for Jaguar E-Pace Facelift 2020 2024 P300e PHEV (1.5T) (309 hp)

ECU: Bosch MED17.9.9

309 HPstock power
540 Nmstock torque
230 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
Software-only remap for a car with standard hardware. 309 hp to 329 hp and 540 Nm to 588 Nm.
Stage 2 BASE for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 309 hp to 338 hp and 540 Nm to 588 Nm.
E85 or other special fuels modification for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
DTC off for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Exhaust flap control/off for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EVAP off for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
AGS off for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
The active grille shutters are switched off in software.
Readiness ok for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
Readiness monitors are set so the car reports ready at an emission inspection.
Cloning (ECU/TCU) for Jaguar E-Pace P300e PHEV (1.5T) (309 hp)
The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 180 credits (€112)
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Pops and bangs70 credits (€98)+ 40 credits (€56)
DTC off45 credits (€63)+ 30 credits (€42)
Exhaust flap control/off55 credits (€77)+ 45 credits (€63)
Catalyst off40 credits (€56)+ 20 credits (€28)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
EVAP off50 credits (€70)+ 40 credits (€56)
AGS off30 credits (€42)+ 30 credits (€42)
Readiness ok45 credits (€63)+ 15 credits (€21)
Cloning (ECU/TCU)199 credits (€278.60)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench, OBD–
Alientech KESS3Bench, Boot–
Flashtec CMDOBD, Bench–
PCMflashBoot–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Jaguar E-Pace P300e PHEV (1.5T) tuning file

ECU and TCU files for the Jaguar E-Pace Facelift 2020 2024 P300e PHEV (1.5T) (309 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol plug-in hybrid
Displacement
1498 cc
Stock power
309 hp / 230 kW
Stock torque
540 Nm
ECU
Bosch MED17.9.9

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp