Chiptuning files » Ford » Tourneo » 2003 2012 » 1.8 TDCI (2003 - 2006) (90 hp / 220 Nm)

Chiptuning files for Ford Tourneo 2003 2012 1.8 TDCI (2003 - 2006) (90 hp)

ECU: Delphi FOMOCO_MPC555 / Siemens/Continental SID202 / Siemens/Continental SID206

90 HPstock power
220 Nmstock torque
67 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Ford Tourneo 1.8 TDCI (2003 - 2006) (90 hp)
Software-only remap for a car with standard hardware. 90 hp to 112 hp and 220 Nm to 297 Nm.
Stage 2 BASE for Ford Tourneo 1.8 TDCI (2003 - 2006) (90 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
VMAX speedlimit on/off higher/lower for Ford Tourneo 1.8 TDCI (2003 - 2006) (90 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Ford Tourneo 1.8 TDCI (2003 - 2006) (90 hp)
Selected fault codes are switched off so they are no longer stored or shown.
DPF/OPF/GPF off for Ford Tourneo 1.8 TDCI (2003 - 2006) (90 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Ford Tourneo 1.8 TDCI (2003 - 2006) (90 hp)
Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Ford Tourneo 1.8 TDCI (2003 - 2006) (90 hp)
The exhaust gas recirculation valve is switched off in software.
Torque monitoring off for Ford Tourneo 1.8 TDCI (2003 - 2006) (90 hp)
Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Hot start fix for Ford Tourneo 1.8 TDCI (2003 - 2006) (90 hp)
Corrects hard starting with a hot engine.
Cloning (ECU/TCU) for Ford Tourneo 1.8 TDCI (2003 - 2006) (90 hp)
The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 160 to 70 credits (€84 to €98), by model year
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
Swirl flaps off45 credits (€63)+ 45 credits (€63)
EGR off35 credits (€49)+ 30 credits (€42)
Hot start fix35 credits (€49)+ 35 credits (€49)
Cloning (ECU/TCU)199 credits (€278.60)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerOBD–
Magicmotorsport FLEXBoot–
Alientech KESS3OBD, Boot–
Alientech PowergateOBD–
Flashtec CMDBDM–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Ford Tourneo 1.8 TDCI (2003 - 2006) tuning file

ECU and TCU files for the Ford Tourneo 2003 2012 1.8 TDCI (2003 - 2006) (90 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Displacement
1753 cc
Stock power
90 hp / 67 kW
Stock torque
220 Nm
ECU
Delphi FOMOCO_MPC555, Siemens/Continental SID202, Siemens/Continental SID206

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp