Chiptuning files » Ferrari » Portofino » 2017 » 3.9 V8 Bi-Turbo (600 hp / 760 Nm)

Chiptuning files for Ferrari Portofino 2017 3.9 V8 Bi-Turbo (600 hp)

ECU: Bosch MED17.3.5

600 HPstock power
760 Nmstock torque
447 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does
Stage 1 for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
Software-only remap for a car with standard hardware. 600 hp to 662 hp and 760 Nm to 852 Nm.
E85 or other special fuels modification for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
DTC off for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
Start-stop is switched off by default.
Cold start off - Catalyst heating off for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Exhaust flap control/off for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EVAP off for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
Readiness ok for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
Readiness monitors are set so the car reports ready at an emission inspection.
RPM Limit Mod for Ferrari Portofino 3.9 V8 Bi-Turbo (600 hp)
The engine speed limit is raised or lowered.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 180 credits (€112)

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Pops and bangs70 credits (€98)+ 40 credits (€56)
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Cold start off - Catalyst heating off50 credits (€70)+ 50 credits (€70)
Exhaust flap control/off55 credits (€77)+ 45 credits (€63)
Catalyst off40 credits (€56)+ 20 credits (€28)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
EVAP off50 credits (€70)+ 40 credits (€56)
Readiness ok45 credits (€63)+ 15 credits (€21)
RPM Limit Mod45 credits (€63)included

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench, Boot–
Magicmotorsport FLEXBench, Boot–
Flashtec CMDBench, Boot–
PCMflashBoot–

Also listed for this vehicle: Dimsport New Trasdata, bFlash.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Ferrari Portofino 3.9 V8 Bi-Turbo tuning file

ECU and TCU files for the Ferrari Portofino 2017 3.9 V8 Bi-Turbo (600 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Displacement
3855 cc
Stock power
600 hp / 447 kW
Stock torque
760 Nm
ECU
Bosch MED17.3.5

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp