Chiptuning files » Dodge » Challenger » 2008 » R/T 5.7 V8 (372 hp / 540 Nm)

Chiptuning files for Dodge Challenger 2008 R/T 5.7 V8 (372 hp)

ECU: Motorola NGC4 / Motorola NGC4A / Siemens/Continental GPEC2A · TCU: ZF 8HP

372 HPstock power
540 Nmstock torque
277 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Dodge Challenger R/T 5.7 V8 (372 hp)
Software-only remap for a car with standard hardware. 372 hp to 389 hp and 540 Nm to 559 Nm.
E85 or other special fuels modification for Dodge Challenger R/T 5.7 V8 (372 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Dodge Challenger R/T 5.7 V8 (372 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Dodge Challenger R/T 5.7 V8 (372 hp)
Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Dodge Challenger R/T 5.7 V8 (372 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Dodge Challenger R/T 5.7 V8 (372 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Dodge Challenger R/T 5.7 V8 (372 hp)
Start-stop is switched off by default.
Exhaust flap control/off for Dodge Challenger R/T 5.7 V8 (372 hp)
Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Dodge Challenger R/T 5.7 V8 (372 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Dodge Challenger R/T 5.7 V8 (372 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
AGS off for Dodge Challenger R/T 5.7 V8 (372 hp)
The active grille shutters are switched off in software.
Cylinder On Demand off for Dodge Challenger R/T 5.7 V8 (372 hp)
Cylinder deactivation is switched off so the engine always runs on all cylinders.
Cloning (ECU/TCU) for Dodge Challenger R/T 5.7 V8 (372 hp)
The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 170 to 80 credits (€98 to €112), by model year

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Pops and bangs70 credits (€98)+ 40 credits (€56)
Hardcut limiter55 to 65 credits (€77 to €91), by model year+ 55 credits (€77)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Exhaust flap control/off45 to 55 credits (€63 to €77), by model year+ 45 credits (€63)
Catalyst off40 credits (€56)+ 20 credits (€28)
EVAP off40 to 50 credits (€56 to €70), by model year+ 40 credits (€56)
AGS off30 credits (€42)+ 30 credits (€42)
Cylinder On Demand off25 credits (€35)+ 25 credits (€35)
Cloning (ECU/TCU)199 credits (€278.60)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerOBD (beta)–
Alientech KESS3OBD, Boot–
Alientech PowergateOBD–
Flashtec CMDOBD, BootBench

Also listed for this vehicle: Alientech KESSv2, Alientech K-TAG, Dimsport New Genius, Dimsport New Trasdata, Bitbox, ByteShooter Toolbox, HP Tuners.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Dodge Challenger R/T 5.7 V8 tuning file

ECU and TCU files for the Dodge Challenger 2008 R/T 5.7 V8 (372 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Engine code
HEMI
Displacement
5654 cc
Stock power
372 hp / 277 kW
Stock torque
540 Nm
ECU
Motorola NGC4, Motorola NGC4A, Siemens/Continental GPEC2A
TCU
ZF 8HP

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp