Chiptuning files » Cupra » Leon » 2020 2024 » 2.0 TSI (245 hp / 370 Nm)

Chiptuning files for Cupra Leon 2020 2024 2.0 TSI (245 hp)

ECU: Siemens/Continental Simos 19.6 · TCU: Bosch DQ381 / Bosch DQ381 Gen2

245 HPstock power
370 Nmstock torque
183 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Stage 2+ option (350 hp / 480 Nm): Full exhaust system with sport catalyst, DPF delete, Turbo inlet pipe, Turbo muffler delete, Air intake, Uprated intercooler

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Cupra Leon 2.0 TSI (245 hp)
Software-only remap for a car with standard hardware. 245 hp to 323 hp and 370 Nm to 453 Nm.
Stage 2 BASE for Cupra Leon 2.0 TSI (245 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 245 hp to 343 hp and 370 Nm to 473 Nm.
E85 or other special fuels modification for Cupra Leon 2.0 TSI (245 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Gearbox TCU tuning for Cupra Leon 2.0 TSI (245 hp)
Faster shift times, modified shift points, raised torque limiters, raised rpm limits and higher clutch pressure where needed.
Pops and bangs for Cupra Leon 2.0 TSI (245 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Launch control for Cupra Leon 2.0 TSI (245 hp)
Holds engine speed at a set limit while stationary so boost builds before pulling away.
Hardcut limiter for Cupra Leon 2.0 TSI (245 hp)
Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Cupra Leon 2.0 TSI (245 hp)
The electronic speed limiter is removed, raised or lowered.
Torque limiter off for Cupra Leon 2.0 TSI (245 hp)
Torque limits in the ECU or gearbox are raised so higher torque is allowed.
DTC off for Cupra Leon 2.0 TSI (245 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Cupra Leon 2.0 TSI (245 hp)
Start-stop is switched off by default.
Exhaust flap control/off for Cupra Leon 2.0 TSI (245 hp)
Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Cupra Leon 2.0 TSI (245 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Cupra Leon 2.0 TSI (245 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EVAP off for Cupra Leon 2.0 TSI (245 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
AGS off for Cupra Leon 2.0 TSI (245 hp)
The active grille shutters are switched off in software.
Torque monitoring off for Cupra Leon 2.0 TSI (245 hp)
Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Cloning (ECU/TCU) for Cupra Leon 2.0 TSI (245 hp)
The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 180 credits (€112)
Stage 2 BASE90 credits (€126)
Gearbox TCU tuning Stage 1 BASIC75 credits (€105)
Gearbox TCU tuning Stage 199 credits (€138.60)
Gearbox TCU tuning Stage 2 BASE150 credits (€210)
Gearbox TCU tuning Stage 3 BASE195 credits (€273)

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Pops and bangs70 credits (€98)+ 40 credits (€56)
Hardcut limiter65 credits (€91)+ 55 credits (€77)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Exhaust flap control/off55 credits (€77)+ 45 credits (€63)
Catalyst off40 credits (€56)+ 20 credits (€28)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
EVAP off50 credits (€70)+ 40 credits (€56)
AGS off30 credits (€42)+ 30 credits (€42)
Cloning (ECU/TCU)199 credits (€278.60)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerOBDBench, OBD
Magicmotorsport FLEXOBDBench, OBD
Alientech KESS3OBDOBD, Bench
Alientech PowergateOBD–
Flashtec CMDOBDOBD, Bench
PCMflash–OBD
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Cupra Leon 2.0 TSI tuning file

ECU and TCU files for the Cupra Leon 2020 2024 2.0 TSI (245 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Engine code
DNPA / DNFB
Displacement
1984 cc
Stock power
245 hp / 183 kW
Stock torque
370 Nm
ECU
Siemens/Continental Simos 19.6
TCU
Bosch DQ381, Bosch DQ381 Gen2

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp