Chiptuning files » Cupra » Leon » 05/2024 » 2.0 TSI (325 hp / 420 Nm)

Chiptuning files for Cupra Leon 05/2024 2.0 TSI (325 hp)

ECU: Siemens/Continental Simos 19.3

StockStage 1 (+ 62 HP)

325 HPstock power

420 Nmstock torque

242 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Cupra Leon 2.0 TSI (325 hp): Software-only remap for a car with standard hardware. 325 hp to 387 hp and 420 Nm to 506 Nm.
E85 or other special fuels modification for Cupra Leon 2.0 TSI (325 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Gearbox TCU tuning for Cupra Leon 2.0 TSI (325 hp): Faster shift times, modified shift points, raised torque limiters, raised rpm limits and higher clutch pressure where needed.
Pops and bangs for Cupra Leon 2.0 TSI (325 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Cupra Leon 2.0 TSI (325 hp): Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Cupra Leon 2.0 TSI (325 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Cupra Leon 2.0 TSI (325 hp): Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Cupra Leon 2.0 TSI (325 hp): Start-stop is switched off by default.
Exhaust flap control/off for Cupra Leon 2.0 TSI (325 hp): Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Cupra Leon 2.0 TSI (325 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Cupra Leon 2.0 TSI (325 hp): The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Torque monitoring off for Cupra Leon 2.0 TSI (325 hp): Torque monitoring is relaxed so a higher torque does not trigger limp mode.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	80 credits (€112)
Gearbox TCU tuning Stage 1 BASIC	75 credits (€105)
Gearbox TCU tuning Stage 1	99 credits (€138.60)
Gearbox TCU tuning Stage 2 BASE	150 credits (€210)
Gearbox TCU tuning Stage 3 BASE	195 credits (€273)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
Hardcut limiter	65 credits (€91)	+ 55 credits (€77)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Start/Stop System Off	40 credits (€56)	+ 40 credits (€56)
Exhaust flap control/off	55 credits (€77)	+ 45 credits (€63)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
DPF/OPF/GPF off	50 credits (€70)	+ 35 credits (€49)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	OBD	–

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.