Chiptuning files » Citroën » Jumper » 2019 » 2.2 BlueHDi (120 hp / 310 Nm)

Chiptuning files for Citroën Jumper 2019 2.2 BlueHDi (120 hp)

ECU: Bosch MD1CS199 / Delphi DCM7.1B / Siemens/Continental SID208

StockStage 1 (+ 67 HP)

120 HPstock power

310 Nmstock torque

89 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Detuned engine: same hardware as the 2.2 BlueHDI 165 hp, limited in software

Available modifications

What each modification does

Stage 1 for Citroën Jumper 2.2 BlueHDi (120 hp): Software-only remap for a car with standard hardware. 120 hp to 187 hp and 310 Nm to 420 Nm.
Stage 2 BASE for Citroën Jumper 2.2 BlueHDi (120 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
VMAX speedlimit on/off higher/lower for Citroën Jumper 2.2 BlueHDi (120 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Citroën Jumper 2.2 BlueHDi (120 hp): Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Citroën Jumper 2.2 BlueHDi (120 hp): Start-stop is switched off by default.
Catalyst off for Citroën Jumper 2.2 BlueHDi (120 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Citroën Jumper 2.2 BlueHDi (120 hp): The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
Swirl flaps off for Citroën Jumper 2.2 BlueHDi (120 hp): Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for Citroën Jumper 2.2 BlueHDi (120 hp): The exhaust gas recirculation valve is switched off in software.
AdBlue off for Citroën Jumper 2.2 BlueHDi (120 hp): The SCR / AdBlue system is switched off in software.
TVA off for Citroën Jumper 2.2 BlueHDi (120 hp): The throttle valve actuator is switched off in software.
Torque monitoring off for Citroën Jumper 2.2 BlueHDi (120 hp): Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Readiness ok for Citroën Jumper 2.2 BlueHDi (120 hp): Readiness monitors are set so the car reports ready at an emission inspection.
Hot start fix for Citroën Jumper 2.2 BlueHDi (120 hp): Corrects hard starting with a hot engine.
Virginize (ECU/TCU) for Citroën Jumper 2.2 BlueHDi (120 hp): The unit is reset to an unpaired state so it can be coded to another car. A different service from IMMO_OFF.
Cloning (ECU/TCU) for Citroën Jumper 2.2 BlueHDi (120 hp): The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Citroën Jumper 2.2 BlueHDi (120 hp): The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	80 credits (€112)
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Start/Stop System Off	40 credits (€56)	+ 40 credits (€56)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
DPF/OPF/GPF off	50 credits (€70)	+ 35 credits (€49)
Swirl flaps off	45 credits (€63)	+ 45 credits (€63)
EGR off	45 credits (€63)	+ 30 credits (€42)
AdBlue off	60 credits (€84)	+ 60 credits (€84)
TVA off	40 credits (€56)	+ 40 credits (€56)
Readiness ok	45 credits (€63)	+ 15 credits (€21)
Hot start fix	45 credits (€63)	+ 35 credits (€49)
Virginize (ECU/TCU)	99 credits (€138.60)	–
Cloning (ECU/TCU)	199 credits (€278.60)	–
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Bench after remote unlock, Boot, OBD	–
Alientech KESS3	OBD, Boot	–
Alientech Powergate	OBD	–
PCMflash	Boot	–

Also listed for this vehicle: Flashtec CMD, bFlash.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.