Chiptuning files » Citroën » Evasion » 1996 » 2.0 HDI (110 hp / 250 Nm)

Chiptuning files for Citroën Evasion 1996 2.0 HDI (110 hp)

ECU: Bosch EDC15C2

110 HPstock power
250 Nmstock torque
82 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Engine performance

Deactivations and fixes

What each modification does
Stage 1 for Citroën Evasion 2.0 HDI (110 hp)
Software-only remap for a car with standard hardware. 110 hp to 135 hp and 250 Nm to 288 Nm.
Stage 2 BASE for Citroën Evasion 2.0 HDI (110 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 110 hp to 144 hp and 250 Nm to 307 Nm.
Hardcut Popcorn limiter for diesel for Citroën Evasion 2.0 HDI (110 hp)
Hard-cut rev limiter for diesel engines with the typical popcorn sound.
DTC off for Citroën Evasion 2.0 HDI (110 hp)
Selected fault codes are switched off so they are no longer stored or shown.
DPF/OPF/GPF off for Citroën Evasion 2.0 HDI (110 hp)
The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EGR off for Citroën Evasion 2.0 HDI (110 hp)
The exhaust gas recirculation valve is switched off in software.
IMMO_OFF for Citroën Evasion 2.0 HDI (110 hp)
The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Virginize (ECU/TCU) for Citroën Evasion 2.0 HDI (110 hp)
The unit is reset to an unpaired state so it can be coded to another car. A different service from IMMO_OFF.
Cloning (ECU/TCU) for Citroën Evasion 2.0 HDI (110 hp)
The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 160 to 80 credits (€84 to €112), by model year
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
Hardcut Popcorn limiter for diesel55 to 65 credits (€77 to €91), by model year+ 40 credits (€56)
DTC off45 credits (€63)+ 30 credits (€42)
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
EGR off35 to 45 credits (€49 to €63), by model year+ 30 credits (€42)
IMMO_OFF99 credits (€138.60)+ 99 credits (€138.60)
Virginize (ECU/TCU)99 credits (€138.60)–
Cloning (ECU/TCU)199 credits (€278.60)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerOBD–
Magicmotorsport FLEXBoot, OBD–
Alientech KESS3OBD, Boot–
Alientech PowergateOBD–
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Citroën Evasion 2.0 HDI tuning file

ECU and TCU files for the Citroën Evasion 1996 2.0 HDI (110 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Stock power
110 hp / 82 kW
Stock torque
250 Nm
ECU
Bosch EDC15C2

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp