Chiptuning files » Chevrolet » Spark » 2011 » 1.0i (68 hp / 93 Nm)

Chiptuning files for Chevrolet Spark 2011 1.0i (68 hp)

ECU: Bosch ME7.9.51 / Delco E83 / Siemens/Continental D42 / Siemens/Continental D52

68 HPstock power
93 Nmstock torque
51 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Chevrolet Spark 1.0i (68 hp)
Software-only remap for a car with standard hardware. 68 hp to 75 hp and 93 Nm to 104 Nm.
Stage 2 BASE for Chevrolet Spark 1.0i (68 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for Chevrolet Spark 1.0i (68 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Chevrolet Spark 1.0i (68 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Launch control for Chevrolet Spark 1.0i (68 hp)
Holds engine speed at a set limit while stationary so boost builds before pulling away.
VMAX speedlimit on/off higher/lower for Chevrolet Spark 1.0i (68 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Chevrolet Spark 1.0i (68 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Chevrolet Spark 1.0i (68 hp)
Start-stop is switched off by default.
Catalyst off for Chevrolet Spark 1.0i (68 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Chevrolet Spark 1.0i (68 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
IMMO_OFF for Chevrolet Spark 1.0i (68 hp)
The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Checksum Correction for Chevrolet Spark 1.0i (68 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 170 to 80 credits (€98 to €112), by model year
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Pops and bangs70 credits (€98)+ 40 credits (€56)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Catalyst off40 credits (€56)+ 20 credits (€28)
EVAP off40 to 50 credits (€56 to €70), by model year+ 40 credits (€56)
IMMO_OFF99 credits (€138.60)+ 99 credits (€138.60)
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench, Boot (beta), OBD–
Alientech KESS3Boot–

Also listed for this vehicle: Alientech K-TAG, ByteShooter Toolbox.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Chevrolet Spark 1.0i tuning file

ECU and TCU files for the Chevrolet Spark 2011 1.0i (68 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Displacement
995 cc
Stock power
68 hp / 51 kW
Stock torque
93 Nm
ECU
Bosch ME7.9.51, Delco E83, Siemens/Continental D42, Siemens/Continental D52

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp