Chiptuning files » BMW » X5 » 3.0sd (286 hp) » Stage 2 BASE

Stage 2 BASE for BMW X5 3.0sd (286 hp)

E70 2007 - 2010 · ECU: Bosch EDC16CP35 / Bosch EDC17CP09 / Bosch EDC17CP45

StockStage 1 (+ 54 HP)Stage 2 (+ 69 HP)
+ 69 HP286 HP355 HP
+ 125 Nm580 Nm705 Nm
+ 52 KW213 KW265 KW

Figures are indicative and depend on the vehicle’s condition, fuel quality, fitted hardware and measuring conditions.

Power and torque curve

StockStage 2

Power (hp)

Torque (Nm)

Indicative curve, calculated from the stock and tuned peak figures. It is not a measured dyno run.

Show the values as a table
rpmStock hpStage 2 hpStock NmStage 2 Nm
1,0004150290353
1,500115128548608
2,000163198580704
2,500204248580705
3,000243297578704
3,500274338557687
4,000286355509632
4,500272337430534
5,000229284326404

What Stage 2 BASE does

Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.

286 hp to 355 hp and 580 Nm to 705 Nm.

Figures are indicative and depend on the vehicle’s condition, fuel quality, fitted hardware and measuring conditions.

Hardware for this engine: Downpipe.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 170 credits (€98)
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 2 BASE file
Hardcut Popcorn limiter for diesel55 credits (€77)+ 40 credits (€56)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Start/Stop System Off40 credits (€56)+ 40 credits (€56)
Catalyst off40 credits (€56)included
DPF/OPF/GPF off50 credits (€70)+ 35 credits (€49)
Swirl flaps off45 credits (€63)–
EGR off35 credits (€49)+ 30 credits (€42)
AdBlue off60 credits (€84)+ 60 credits (€84)
MAF off45 credits (€63)included
TVA off40 credits (€56)included
AGS off30 credits (€42)included
Readiness ok45 credits (€63)+ 15 credits (€21)
Hot start fix35 credits (€49)included
IMMO_OFF99 credits (€138.60)+ 99 credits (€138.60)
Cloning (ECU/TCU)199 credits (€278.60)–

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
AutotunerBench, Boot, OBDOBD
Magicmotorsport FLEXBench, Boot, OBDBench
Alientech KESS3OBD, Bench, Boot–
Alientech PowergateOBD–
Flashtec CMDBench, Boot–
PCMflashBoot–

Also listed for this vehicle: Alientech KESSv2, Alientech K-TAG, Dimsport New Genius, Dimsport New Trasdata.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

BMW X5 3.0sd tuning file

ECU and TCU files for the BMW X5 E70 2007 - 2010 3.0sd (286 hp).

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Engine code
306D5 / M57D30T2 / M57D30TU2
Displacement
2993 cc
Stock power
286 hp / 213 kW
Stock torque
580 Nm
ECU
Bosch EDC16CP35, Bosch EDC17CP09, Bosch EDC17CP45
TCU
ZF 6HP26

Stage 2 BASE for other vehicles

All BMW X5 engines
All BMW models
All brands

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp