Chiptuning files » BMW » 7 Series » E65 2002 - 2008 » 30i (231 hp / 300 Nm)

Chiptuning files for BMW 7 Series E65 2002 - 2008 30i (231 hp)

ECU: Siemens/Continental MS45 · TCU: ZF 6HP26

Stock

231 HPstock power

300 Nmstock torque

172 KWstock power

Tuned figures for this engine follow after we have seen your original file.

Available modifications

What each modification does

Stage 1 for BMW 7 Series 30i (231 hp): Software-only remap for a car with standard hardware.
Stage 2 BASE for BMW 7 Series 30i (231 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
Pops and bangs for BMW 7 Series 30i (231 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Torque limiter off for BMW 7 Series 30i (231 hp): Torque limits in the ECU or gearbox are raised so higher torque is allowed.
DTC off for BMW 7 Series 30i (231 hp): Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for BMW 7 Series 30i (231 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for BMW 7 Series 30i (231 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for BMW 7 Series 30i (231 hp): The secondary air injection system is switched off in software.
IMMO_OFF for BMW 7 Series 30i (231 hp): The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for BMW 7 Series 30i (231 hp): The complete content of one unit is copied to another unit of the same type.
Checksum Correction for BMW 7 Series 30i (231 hp): The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	60 to 70 credits (€84 to €98), by model year
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
DTC off	45 credits (€63)	+ 30 credits (€42)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
EVAP off	40 credits (€56)	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
IMMO_OFF	99 credits (€138.60)	+ 99 credits (€138.60)
Cloning (ECU/TCU)	199 credits (€278.60)	–
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	OBD	OBD
Magicmotorsport FLEX	Boot	Bench
Alientech KESS3	OBD, Boot	–
Alientech Powergate	OBD	–
Flashtec CMD	OBD, BDM	–

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.