Chiptuning files » BMW » 7 Series » 1995 - E38 » 730D (193 hp / 410 Nm)

Chiptuning files for BMW 7 Series 1995 - E38 730D (193 hp)

ECU: Bosch DDE4.0

193 HPstock power
410 Nmstock torque
144 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Engine performance

What each modification does
Stage 1 for BMW 7 Series 730D (193 hp)
Software-only remap for a car with standard hardware. 193 hp to 220 hp and 410 Nm to 476 Nm.
Stage 2 BASE for BMW 7 Series 730D (193 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
VMAX speedlimit on/off higher/lower for BMW 7 Series 730D (193 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for BMW 7 Series 730D (193 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Swirl flaps off for BMW 7 Series 730D (193 hp)
Intake flap operation is switched off for engines where the flaps have been removed.
EGR off for BMW 7 Series 730D (193 hp)
The exhaust gas recirculation valve is switched off in software.
AdBlue off for BMW 7 Series 730D (193 hp)
The SCR / AdBlue system is switched off in software.
MAF off for BMW 7 Series 730D (193 hp)
The engine runs without the air mass meter signal.
TVA off for BMW 7 Series 730D (193 hp)
The throttle valve actuator is switched off in software.
Checksum Correction for BMW 7 Series 730D (193 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.
Smoke test fix for BMW 7 Series 730D (193 hp)
The calibration is adjusted for the diesel smoke (opacity) test.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 160 to 80 credits (€84 to €112), by model year
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Swirl flaps off45 credits (€63)+ 45 credits (€63)
EGR off35 to 45 credits (€49 to €63), by model year+ 30 credits (€42)
AdBlue off60 credits (€84)+ 60 credits (€84)
MAF off45 to 55 credits (€63 to €77), by model year–
TVA off40 credits (€56)+ 40 credits (€56)
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
Flashtec CMDOBD–

Also listed for this vehicle: Alientech KESSv2.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

BMW 7 Series 730D tuning file

ECU and TCU files for the BMW 7 Series 1995 - E38 730D (193 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Diesel
Engine code
M57D29
Displacement
2926 cc
Stock power
193 hp / 144 kW
Stock torque
410 Nm
ECU
Bosch DDE4.0

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp