Software-only remap for a car with standard hardware. 102 hp to 204 hp and 180 Nm to 303 Nm.
Stage 2 BASE for BMW 1 Series 114i (1.6T) (102 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 102 hp to 224 hp and 180 Nm to 327 Nm.
Stage 3 BASE for BMW 1 Series 114i (1.6T) (102 hp)
Remap for a larger or hybrid turbo with supporting hardware. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for BMW 1 Series 114i (1.6T) (102 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Flex fuel mod for E85 or other fuel types for BMW 1 Series 114i (1.6T) (102 hp)
The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Gearbox TCU tuning for BMW 1 Series 114i (1.6T) (102 hp)
Faster shift times, modified shift points, raised torque limiters, raised rpm limits and higher clutch pressure where needed.
Pops and bangs for BMW 1 Series 114i (1.6T) (102 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for BMW 1 Series 114i (1.6T) (102 hp)
Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
Sport displays calibration for BMW 1 Series 114i (1.6T) (102 hp)
The power and torque displays are recalibrated to the tuned values.
VMAX speedlimit on/off higher/lower for BMW 1 Series 114i (1.6T) (102 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for BMW 1 Series 114i (1.6T) (102 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for BMW 1 Series 114i (1.6T) (102 hp)
Start-stop is switched off by default.
Cold start off - Catalyst heating off for BMW 1 Series 114i (1.6T) (102 hp)
The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Exhaust flap control/off for BMW 1 Series 114i (1.6T) (102 hp)
Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for BMW 1 Series 114i (1.6T) (102 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for BMW 1 Series 114i (1.6T) (102 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for BMW 1 Series 114i (1.6T) (102 hp)
The secondary air injection system is switched off in software.
Readiness ok for BMW 1 Series 114i (1.6T) (102 hp)
Readiness monitors are set so the car reports ready at an emission inspection.
IMMO_OFF for BMW 1 Series 114i (1.6T) (102 hp)
The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for BMW 1 Series 114i (1.6T) (102 hp)
The complete content of one unit is copied to another unit of the same type.
CVN correction for BMW 1 Series 114i (1.6T) (102 hp)
The calibration verification number is corrected so it matches the modified software.
Checksum Correction for BMW 1 Series 114i (1.6T) (102 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.
Idle RPM Mod for BMW 1 Series 114i (1.6T) (102 hp)
The idle speed is raised or lowered; the rev limit can be changed as well.
Prices for this vehicle
Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.
Tuning file
Price
Stage 1
70 credits (€98)
Stage 2 BASE
90 credits (€126)
Stage 3 BASE
250 credits (€350)
Gearbox TCU tuning Stage 1 BASIC
75 credits (€105)
Gearbox TCU tuning Stage 1
99 credits (€138.60)
Gearbox TCU tuning Stage 2 BASE
150 credits (€210)
Gearbox TCU tuning Stage 3 BASE
195 credits (€273)
Options
Option
Ordered on its own
Added to a Stage 1 file
E85 or other special fuels modification
120 credits (€168)
+ 120 credits (€168)
Flex fuel mod for E85 or other fuel types
150 credits (€210)
+ 150 credits (€210)
Pops and bangs
70 credits (€98)
+ 40 credits (€56)
Hardcut limiter
55 credits (€77)
+ 55 credits (€77)
VMAX speedlimit on/off higher/lower
40 credits (€56)
included
DTC off
45 credits (€63)
+ 30 credits (€42)
Start/Stop System Off
40 credits (€56)
+ 40 credits (€56)
Cold start off - Catalyst heating off
50 credits (€70)
+ 50 credits (€70)
Exhaust flap control/off
45 credits (€63)
+ 45 credits (€63)
Catalyst off
40 credits (€56)
+ 20 credits (€28)
EVAP off
40 credits (€56)
+ 40 credits (€56)
SAI off
40 credits (€56)
+ 40 credits (€56)
Readiness ok
45 credits (€63)
+ 15 credits (€21)
IMMO_OFF
99 credits (€138.60)
+ 99 credits (€138.60)
Cloning (ECU/TCU)
199 credits (€278.60)
–
CVN correction
25 credits (€35)
+ 25 credits (€35)
Checksum Correction
10 credits (€14)
+ 10 credits (€14)
Idle RPM Mod
45 credits (€63)
+ 45 credits (€63)
Most options cost less when you add them to a stage file than when you order them on their own.
Tools to read this vehicle
Tool
ECU read method
TCU read method
Autotuner
Bench, Boot, OBD
–
Magicmotorsport FLEX
Bench, Boot, OBD
–
Alientech KESS3
OBD, Bench, Boot
–
Alientech Powergate
OBD
–
Flashtec CMD
OBD, Bench, Boot
–
PCMflash
Boot
–
Also listed for this vehicle: Alientech KESSv2, Dimsport New Genius, bFlash.
Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.
BMW 1 Series 114i (1.6T) tuning file
ECU and TCU files for the BMW 1 Series F2x 2011 - 2015 114i (1.6T) (102 hp).
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.
Response time: Quick!
Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.