Chiptuning files » Audi » RS6 » 2002 - C5 » 4.2 Biturbo (450 hp / 560 Nm)

Chiptuning files for Audi RS6 2002 - C5 4.2 Biturbo (450 hp)

ECU: Bosch ME7.1.1

StockStage 1 (+ 48 HP)Stage 2 (+ 71 HP)

450 HPstock power

560 Nmstock torque

336 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Audi RS6 4.2 Biturbo (450 hp): Software-only remap for a car with standard hardware. 450 hp to 498 hp and 560 Nm to 664 Nm.
Stage 2 BASE for Audi RS6 4.2 Biturbo (450 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 450 hp to 521 hp and 560 Nm to 697 Nm.
E85 or other special fuels modification for Audi RS6 4.2 Biturbo (450 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Audi RS6 4.2 Biturbo (450 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Audi RS6 4.2 Biturbo (450 hp): Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Audi RS6 4.2 Biturbo (450 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Audi RS6 4.2 Biturbo (450 hp): Selected fault codes are switched off so they are no longer stored or shown.
Cold start off - Catalyst heating off for Audi RS6 4.2 Biturbo (450 hp): The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Exhaust flap control/off for Audi RS6 4.2 Biturbo (450 hp): Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Audi RS6 4.2 Biturbo (450 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Audi RS6 4.2 Biturbo (450 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Audi RS6 4.2 Biturbo (450 hp): The secondary air injection system is switched off in software.
IMMO_OFF for Audi RS6 4.2 Biturbo (450 hp): The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	60 to 80 credits (€84 to €112), by model year
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
Hardcut limiter	55 to 65 credits (€77 to €91), by model year	+ 55 credits (€77)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Cold start off - Catalyst heating off	50 credits (€70)	+ 50 credits (€70)
Exhaust flap control/off	45 to 55 credits (€63 to €77), by model year	+ 45 credits (€63)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
EVAP off	40 to 50 credits (€56 to €70), by model year	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
IMMO_OFF	99 credits (€138.60)	+ 99 credits (€138.60)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	OBD (beta)	–
Alientech KESS3	OBD, Boot	–
Alientech Powergate	OBD	–

Also listed for this vehicle: Alientech KESSv2, Alientech K-TAG, Flashtec CMD, Dimsport New Genius, ByteShooter Toolbox.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.