Chiptuning files » Audi » Q7 » 4M Facelift II 2024 » 60 TFSI-e (3.0T PHEV) (490 hp / 700 Nm)

Chiptuning files for Audi Q7 4M Facelift II 2024 60 TFSI-e (3.0T PHEV) (490 hp)

490 HPstock power
700 Nmstock torque
365 KWstock power

Select a stage for the tuned figures and the power and torque curve. ECU not confirmed yet: the figures are the expected gain for this engine.

Available modifications

What each modification does
Stage 1 for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
Software-only remap for a car with standard hardware. 490 hp to 500 hp and 700 Nm to 1004 Nm.
Stage 2 BASE for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Flex fuel mod for E85 or other fuel types for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Gearbox TCU tuning for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
Faster shift times, modified shift points, raised torque limiters, raised rpm limits and higher clutch pressure where needed.
VMAX speedlimit on/off higher/lower for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
The secondary air injection system is switched off in software.
Checksum Correction for Audi Q7 60 TFSI-e (3.0T PHEV) (490 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 180 credits (€112)
Stage 2 BASE90 credits (€126)
Gearbox TCU tuning Stage 1 BASIC75 credits (€105)
Gearbox TCU tuning Stage 199 credits (€138.60)
Gearbox TCU tuning Stage 2 BASE150 credits (€210)
Gearbox TCU tuning Stage 3 BASE195 credits (€273)

Options

OptionOrdered on its ownAdded to a Stage 1 file
E85 or other special fuels modification120 credits (€168)+ 120 credits (€168)
Flex fuel mod for E85 or other fuel types150 credits (€210)+ 150 credits (€210)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Catalyst off40 credits (€56)+ 20 credits (€28)
EVAP off50 credits (€70)+ 40 credits (€56)
SAI off40 credits (€56)+ 40 credits (€56)
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Audi Q7 60 TFSI-e (3.0T PHEV) tuning file

ECU and TCU files for the Audi Q7 4M Facelift II 2024 60 TFSI-e (3.0T PHEV) (490 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol hybrid
Displacement
2995 cc
Stock power
490 hp / 365 kW
Stock torque
700 Nm
ECU
not known yet

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp