Chiptuning files » Audi » Q6 » 2022 » 45 TFSI (261 hp / 400 Nm)

Chiptuning files for Audi Q6 2022 45 TFSI (261 hp)

ECU: Siemens/Continental Simos 19.6 · TCU: Temic DL382

Stock

261 HPstock power

400 Nmstock torque

195 KWstock power

Tuned figures for this engine follow after we have seen your original file.

Available modifications

What each modification does

E85 or other special fuels modification for Audi Q6 45 TFSI (261 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Pops and bangs for Audi Q6 45 TFSI (261 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Audi Q6 45 TFSI (261 hp): Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Audi Q6 45 TFSI (261 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Audi Q6 45 TFSI (261 hp): Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Audi Q6 45 TFSI (261 hp): Start-stop is switched off by default.
Exhaust flap control/off for Audi Q6 45 TFSI (261 hp): Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Audi Q6 45 TFSI (261 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Audi Q6 45 TFSI (261 hp): The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EVAP off for Audi Q6 45 TFSI (261 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
AGS off for Audi Q6 45 TFSI (261 hp): The active grille shutters are switched off in software.
Torque monitoring off for Audi Q6 45 TFSI (261 hp): Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Cloning (ECU/TCU) for Audi Q6 45 TFSI (261 hp): The complete content of one unit is copied to another unit of the same type.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Options

Option	Ordered on its own
E85 or other special fuels modification	120 credits (€168)
Pops and bangs	70 credits (€98)
Hardcut limiter	65 credits (€91)
VMAX speedlimit on/off higher/lower	40 credits (€56)
DTC off	45 credits (€63)
Start/Stop System Off	40 credits (€56)
Exhaust flap control/off	55 credits (€77)
Catalyst off	40 credits (€56)
DPF/OPF/GPF off	50 credits (€70)
EVAP off	50 credits (€70)
AGS off	30 credits (€42)
Cloning (ECU/TCU)	199 credits (€278.60)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	OBD	Bench, OBD

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.