Chiptuning files » Audi » A6 » C8 07/2018 2023 » 40 TFSI (2.0) (252 hp / 370 Nm)

Chiptuning files for Audi A6 C8 07/2018 2023 40 TFSI (2.0) (252 hp)

ECU: Bosch MG1CS001 · TCU: Temic DL382

Stock

252 HPstock power

370 Nmstock torque

188 KWstock power

Tuned figures for this engine follow after we have seen your original file.

Available modifications

What each modification does

Stage 1 for Audi A6 40 TFSI (2.0) (252 hp): Software-only remap for a car with standard hardware.
Gearbox TCU tuning for Audi A6 40 TFSI (2.0) (252 hp): Faster shift times, modified shift points, raised torque limiters, raised rpm limits and higher clutch pressure where needed.
Pops and bangs for Audi A6 40 TFSI (2.0) (252 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
VMAX speedlimit on/off higher/lower for Audi A6 40 TFSI (2.0) (252 hp): The electronic speed limiter is removed, raised or lowered.
Torque limiter off for Audi A6 40 TFSI (2.0) (252 hp): Torque limits in the ECU or gearbox are raised so higher torque is allowed.
DTC off for Audi A6 40 TFSI (2.0) (252 hp): Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Audi A6 40 TFSI (2.0) (252 hp): Start-stop is switched off by default.
Cold start off - Catalyst heating off for Audi A6 40 TFSI (2.0) (252 hp): The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Catalyst off for Audi A6 40 TFSI (2.0) (252 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
DPF/OPF/GPF off for Audi A6 40 TFSI (2.0) (252 hp): The particulate filter function (diesel DPF, petrol OPF/GPF) is switched off in software. The filter has to be removed physically first.
EVAP off for Audi A6 40 TFSI (2.0) (252 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Audi A6 40 TFSI (2.0) (252 hp): The secondary air injection system is switched off in software.
AGS off for Audi A6 40 TFSI (2.0) (252 hp): The active grille shutters are switched off in software.
Torque monitoring off for Audi A6 40 TFSI (2.0) (252 hp): Torque monitoring is relaxed so a higher torque does not trigger limp mode.
Readiness ok for Audi A6 40 TFSI (2.0) (252 hp): Readiness monitors are set so the car reports ready at an emission inspection.
Boost Sensor Calibration for Audi A6 40 TFSI (2.0) (252 hp): Calibration for an uprated boost pressure (MAP) sensor.
RPM Limit Mod for Audi A6 40 TFSI (2.0) (252 hp): The engine speed limit is raised or lowered.
Cloning (ECU/TCU) for Audi A6 40 TFSI (2.0) (252 hp): The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Audi A6 40 TFSI (2.0) (252 hp): The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	80 credits (€112)
Gearbox TCU tuning Stage 1 BASIC	75 credits (€105)
Gearbox TCU tuning Stage 1	99 credits (€138.60)
Gearbox TCU tuning Stage 2 BASE	150 credits (€210)
Gearbox TCU tuning Stage 3 BASE	195 credits (€273)

Options

Option	Ordered on its own	Added to a Stage 1 file
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Start/Stop System Off	40 credits (€56)	+ 40 credits (€56)
Cold start off - Catalyst heating off	50 credits (€70)	+ 50 credits (€70)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
DPF/OPF/GPF off	50 credits (€70)	+ 35 credits (€49)
EVAP off	50 credits (€70)	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
AGS off	30 credits (€42)	+ 30 credits (€42)
Readiness ok	45 credits (€63)	+ 15 credits (€21)
Boost Sensor Calibration	65 credits (€91)	+ 55 credits (€77)
RPM Limit Mod	45 credits (€63)	included
Cloning (ECU/TCU)	199 credits (€278.60)	–
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Bench, OBD	Bench, OBD
Magicmotorsport FLEX	Bench, OBD	–
Alientech KESS3	Bench	–
Flashtec CMD	OBD, Bench	OBD, Bench
PCMflash	Boot	OBD, Boot

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.