Chiptuning files » Audi » A6 » C7 2011 2014 » 2.8 FSI (204 hp / 280 Nm)

Chiptuning files for Audi A6 C7 2011 2014 2.8 FSI (204 hp)

ECU: Siemens/Continental Simos 8.10

StockStage 1 (+ 22 HP)Stage 2 (+ 23 HP)

204 HPstock power

280 Nmstock torque

152 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Audi A6 2.8 FSI (204 hp): Software-only remap for a car with standard hardware. 204 hp to 226 hp and 280 Nm to 302 Nm.
Stage 2 BASE for Audi A6 2.8 FSI (204 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 204 hp to 227 hp and 280 Nm to 313 Nm.
E85 or other special fuels modification for Audi A6 2.8 FSI (204 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Flex fuel mod for E85 or other fuel types for Audi A6 2.8 FSI (204 hp): The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Pops and bangs for Audi A6 2.8 FSI (204 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Audi A6 2.8 FSI (204 hp): Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Audi A6 2.8 FSI (204 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Audi A6 2.8 FSI (204 hp): Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Audi A6 2.8 FSI (204 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Audi A6 2.8 FSI (204 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Audi A6 2.8 FSI (204 hp): The secondary air injection system is switched off in software.
IMMO_OFF for Audi A6 2.8 FSI (204 hp): The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Checksum Correction for Audi A6 2.8 FSI (204 hp): The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 credits (€98)
Stage 2 BASE	90 credits (€126)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Flex fuel mod for E85 or other fuel types	150 credits (€210)	+ 150 credits (€210)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
Hardcut limiter	55 credits (€77)	+ 55 credits (€77)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
EVAP off	40 credits (€56)	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
IMMO_OFF	99 credits (€138.60)	+ 99 credits (€138.60)
Checksum Correction	10 credits (€14)	+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	OBD (beta)	–
Alientech KESS3	OBD, Bench	OBD, Bench
Alientech Powergate	OBD	–
Flashtec CMD	OBD, Boot	–

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.