Chiptuning files » Audi » A6 » C7 2011 2014 » 2.0 TFSI (180 hp / 320 Nm)

Chiptuning files for Audi A6 C7 2011 2014 2.0 TFSI (180 hp)

ECU: Bosch MED17.1 / Siemens/Continental Simos 18 · TCU: Temic DL501 / Temic VL381 / ZF AL551

StockStage 1 (+ 77 HP)

180 HPstock power

320 Nmstock torque

134 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

What each modification does

Stage 1 for Audi A6 2.0 TFSI (180 hp): Software-only remap for a car with standard hardware. 180 hp to 257 hp and 320 Nm to 417 Nm.
Stage 2 BASE for Audi A6 2.0 TFSI (180 hp): Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
Stage 3 BASE for Audi A6 2.0 TFSI (180 hp): Remap for a larger or hybrid turbo with supporting hardware. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
E85 or other special fuels modification for Audi A6 2.0 TFSI (180 hp): The calibration is set up for one special fuel, for example E85. This is not a flex-fuel setup.
Flex fuel mod for E85 or other fuel types for Audi A6 2.0 TFSI (180 hp): The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Gearbox TCU tuning for Audi A6 2.0 TFSI (180 hp): Faster shift times, modified shift points, raised torque limiters, raised rpm limits and higher clutch pressure where needed.
Pops and bangs for Audi A6 2.0 TFSI (180 hp): Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
Hardcut limiter for Audi A6 2.0 TFSI (180 hp): Ignition is cut at the limiter instead of fuel being reduced early, so full power is available to the redline.
VMAX speedlimit on/off higher/lower for Audi A6 2.0 TFSI (180 hp): The electronic speed limiter is removed, raised or lowered.
DTC off for Audi A6 2.0 TFSI (180 hp): Selected fault codes are switched off so they are no longer stored or shown.
Start/Stop System Off for Audi A6 2.0 TFSI (180 hp): Start-stop is switched off by default.
Cold start off - Catalyst heating off for Audi A6 2.0 TFSI (180 hp): The catalyst-heating phase after a cold start (raised idle, retarded ignition) is removed.
Exhaust flap control/off for Audi A6 2.0 TFSI (180 hp): Exhaust valves can be opened or closed independent of the driving mode. For cars with valves in the original exhaust.
Catalyst off for Audi A6 2.0 TFSI (180 hp): Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Audi A6 2.0 TFSI (180 hp): Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Audi A6 2.0 TFSI (180 hp): The secondary air injection system is switched off in software.
Readiness ok for Audi A6 2.0 TFSI (180 hp): Readiness monitors are set so the car reports ready at an emission inspection.
IMMO_OFF for Audi A6 2.0 TFSI (180 hp): The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for Audi A6 2.0 TFSI (180 hp): The complete content of one unit is copied to another unit of the same type.
CVN correction for Audi A6 2.0 TFSI (180 hp): The calibration verification number is corrected so it matches the modified software.
Checksum Correction for Audi A6 2.0 TFSI (180 hp): The checksums of the file are recalculated so the control unit accepts the modified software.
Idle RPM Mod for Audi A6 2.0 TFSI (180 hp): The idle speed is raised or lowered; the rev limit can be changed as well.

Prices for this vehicle

Pay with

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning file	Price
Stage 1	70 credits (€98)
Stage 2 BASE	90 credits (€126)
Stage 3 BASE	250 credits (€350)
Gearbox TCU tuning Stage 1 BASIC	75 credits (€105)
Gearbox TCU tuning Stage 1	99 credits (€138.60)
Gearbox TCU tuning Stage 2 BASE	150 credits (€210)
Gearbox TCU tuning Stage 3 BASE	195 credits (€273)

Options

Option	Ordered on its own	Added to a Stage 1 file
E85 or other special fuels modification	120 credits (€168)	+ 120 credits (€168)
Flex fuel mod for E85 or other fuel types	150 credits (€210)	+ 150 credits (€210)
Pops and bangs	70 credits (€98)	+ 40 credits (€56)
Hardcut limiter	55 credits (€77)	+ 55 credits (€77)
VMAX speedlimit on/off higher/lower	40 credits (€56)	included
DTC off	45 credits (€63)	+ 30 credits (€42)
Start/Stop System Off	40 credits (€56)	+ 40 credits (€56)
Cold start off - Catalyst heating off	50 credits (€70)	+ 50 credits (€70)
Exhaust flap control/off	45 credits (€63)	+ 45 credits (€63)
Catalyst off	40 credits (€56)	+ 20 credits (€28)
EVAP off	40 credits (€56)	+ 40 credits (€56)
SAI off	40 credits (€56)	+ 40 credits (€56)
Readiness ok	45 credits (€63)	+ 15 credits (€21)
IMMO_OFF	99 credits (€138.60)	+ 99 credits (€138.60)
Cloning (ECU/TCU)	199 credits (€278.60)	–
CVN correction	25 credits (€35)	+ 25 credits (€35)
Checksum Correction	10 credits (€14)	+ 10 credits (€14)
Idle RPM Mod	45 credits (€63)	+ 45 credits (€63)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

Tool	ECU read method	TCU read method
Autotuner	Bench, Boot, OBD	Bench, Bench (beta), OBD
Magicmotorsport FLEX	Bench, Boot, OBD	–

Also listed for this vehicle: Alientech KESSv2, Alientech K-TAG, Flashtec CMD, Dimsport New Genius, Dimsport New Trasdata, ByteShooter Toolbox.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.