Chiptuning files » Audi » A4 » B7 2004 - 2008 » 1.6i (102 hp / 148 Nm)

Chiptuning files for Audi A4 B7 2004 - 2008 1.6i (102 hp)

ECU: Siemens/Continental Simos 3.4 / Siemens/Continental Simos 7.1

102 HPstock power
148 Nmstock torque
76 KWstock power

Select a stage for the tuned figures and the power and torque curve.

Available modifications

Immobiliser and cloning

What each modification does
Stage 1 for Audi A4 1.6i (102 hp)
Software-only remap for a car with standard hardware. 102 hp to 112 hp and 148 Nm to 162 Nm.
Stage 2 BASE for Audi A4 1.6i (102 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
Flex fuel mod for E85 or other fuel types for Audi A4 1.6i (102 hp)
The engine adapts to the fuel that is in the tank, from petrol to E85 and any blend in between. This is not a fixed E85 calibration.
Pops and bangs for Audi A4 1.6i (102 hp)
Fuel still injected on overrun ignites in the exhaust and gives the crackle sound. Intensity can be set: soft (burbles), normal, hard or flames.
VMAX speedlimit on/off higher/lower for Audi A4 1.6i (102 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Audi A4 1.6i (102 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Audi A4 1.6i (102 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
EVAP off for Audi A4 1.6i (102 hp)
Monitoring of the fuel vapour (EVAP) system is switched off.
SAI off for Audi A4 1.6i (102 hp)
The secondary air injection system is switched off in software.
IMMO_OFF for Audi A4 1.6i (102 hp)
The immobiliser check is removed from the ECU, so the engine starts without the immobiliser.
Cloning (ECU/TCU) for Audi A4 1.6i (102 hp)
The complete content of one unit is copied to another unit of the same type.
Checksum Correction for Audi A4 1.6i (102 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for cars. Prices are set in euro.

Tuning filePrice
Stage 160 to 70 credits (€84 to €98), by model year
Stage 2 BASE90 credits (€126)

Options

OptionOrdered on its ownAdded to a Stage 1 file
Flex fuel mod for E85 or other fuel types150 credits (€210)+ 150 credits (€210)
Pops and bangs70 credits (€98)+ 40 credits (€56)
VMAX speedlimit on/off higher/lower40 credits (€56)included
DTC off45 credits (€63)+ 30 credits (€42)
Catalyst off40 credits (€56)+ 20 credits (€28)
EVAP off40 credits (€56)+ 40 credits (€56)
SAI off40 credits (€56)+ 40 credits (€56)
IMMO_OFF99 credits (€138.60)+ 99 credits (€138.60)
Cloning (ECU/TCU)199 credits (€278.60)–
Checksum Correction10 credits (€14)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Tools to read this vehicle

ToolECU read methodTCU read method
Alientech KESS3OBD, Boot–
Alientech PowergateOBD–
PCMflashOBD–

Also listed for this vehicle: Alientech KESSv2.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Audi A4 1.6i tuning file

ECU and TCU files for the Audi A4 B7 2004 - 2008 1.6i (102 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Engine code
ALZ
Displacement
1596 cc
Stock power
102 hp / 76 kW
Stock torque
148 Nm
ECU
Siemens/Continental Simos 3.4, Siemens/Continental Simos 7.1

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp