Chiptuning files » Husqvarna » Supermoto » 2016 - 2020 » 701 Supermoto (A2) (45 hp / 67 Nm)

Chiptuning files for Husqvarna Supermoto 2016 - 2020 701 Supermoto (A2) (45 hp)

45 HPstock power
67 Nmstock torque
34 KWstock power

Select a stage for the tuned figures. ECU not confirmed yet: the figures are the expected gain for this engine.

A2 version (35 kW). The manufacturer limits this bike to 35 kW (48 hp) for the A2 licence. Stage 1 removes the limit in the ECU software, which is why the gain is so large. Software is not always the whole limit: depending on the model there can also be a throttle stop, other intake funnels or throttle bodies, or another twist grip, and a bike that was restricted afterwards with a kit can carry a small module between the twist grip and the ECU. Those parts have to be changed or removed too before the engine reaches the power of the unrestricted version. This model: no parts to change: on this model the 35 kW limit sits in the ECU software alone.

Available modifications

Engine performance

What each modification does
Stage 1 for Husqvarna Supermoto 701 Supermoto (A2) (45 hp)
Software-only remap for a bike with standard hardware. 45 hp to 74 hp and 67 Nm to 75 Nm.
Stage 2 BASE for Husqvarna Supermoto 701 Supermoto (A2) (45 hp)
Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us.
VMAX speedlimit on/off higher/lower for Husqvarna Supermoto 701 Supermoto (A2) (45 hp)
The electronic speed limiter is removed, raised or lowered.
DTC off for Husqvarna Supermoto 701 Supermoto (A2) (45 hp)
Selected fault codes are switched off so they are no longer stored or shown.
Catalyst off for Husqvarna Supermoto 701 Supermoto (A2) (45 hp)
Catalyst monitoring by the lambda (O2) sensor is switched off so a sport catalyst or decat does not raise fault codes.
Checksum Correction for Husqvarna Supermoto 701 Supermoto (A2) (45 hp)
The checksums of the file are recalculated so the control unit accepts the modified software.

Prices for this vehicle

Prices shown for single credits. Choose a credit pack to see how much cheaper it is; unused credits stay in your account for other projects. Prices for bikes and quads: the price for cars plus 20 credits per file. Prices are set in euro.

Tuning filePrice
Stage 1100 credits (€140)
Stage 2 BASE110 credits (€154)

Options

OptionOrdered on its ownAdded to a Stage 1 file
VMAX speedlimit on/off higher/lower60 credits (€84)included
DTC off65 credits (€91)+ 30 credits (€42)
Catalyst off60 credits (€84)+ 20 credits (€28)
Checksum Correction30 credits (€42)+ 10 credits (€14)

Most options cost less when you add them to a stage file than when you order them on their own.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

Husqvarna Supermoto 701 Supermoto (A2) tuning file

ECU and TCU files for the Husqvarna Supermoto 2016 - 2020 701 Supermoto (A2) (45 hp).

Stage 1 on average in 50 minutes.

Upload your original file

Prices for this vehicle

Engine and control units

Fuel
Petrol
Displacement
693 cc
Stock power
45 hp / 34 kW
Stock torque
67 Nm
ECU
not known yet

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp