Stage 2 BASE for Mercedes-Benz GLA

Remap matched to hardware upgrades. Which parts are needed differs per engine. If needed we fine-tune the file up to 3 times free of charge, based on the datalogs you send us. 45 engines.

Mercedes-Benz GLA engines with Stage 2 BASE

EngineGenerationFuelStockECUStage 2
180D (Euro 6d-ISC-FCM)H247 - Phase 2 2023Diesel116 hpBosch MD1CS006
200D (Euro 6d-ISC-FCM)H247 - Phase 2 2023Diesel150 hpBosch MD1CP001
220D 4MATIC (Euro 6d-ISC-FCM)H247 - Phase 2 2023Diesel190 hpBosch MD1CP001
250eH247 - Phase 2 2023Petrol hybrid218 hpBosch MED17.7.7
35 AMG (Euro 6d-ISC-FCM)H247 - Phase 2 2023Petrol306 hpBosch MED17.7.7
45 AMG-S (Euro 6 D-ISC-FCM)H247 - Phase 2 2023Petrol421 hpBosch MG1CP002
180DH247 - Phase 1 2020 - 2023Diesel116 hpBosch MD1CP001, Bosch MRD1.42
180D (Euro 6 D-temp)H247 - Phase 1 2020 - 2023Diesel116 hpBosch MD1CP001, Bosch MRD1.42
180D (Euro 6 D-full 2021 ->...)H247 - Phase 1 2020 - 2023Diesel116 hpBosch MD1CP001, Bosch MRD1.42
200D (Euro 6 D-temp)H247 - Phase 1 2020 - 2023Diesel150 hpBosch MD1CP001207 hp / 453 Nm
200DH247 - Phase 1 2020 - 2023Diesel150 hpBosch MD1CP001207 hp / 453 Nm
200D (Euro 6 D-full 2021 ->...)H247 - Phase 1 2020 - 2023Diesel150 hpBosch MD1CP001207 hp / 453 Nm
200D (Euro 6d-ISC-FCM)H247 - Phase 1 2020 - 2023Diesel150 hpBosch MD1CP001207 hp / 453 Nm
220 (2.0T)H247 - Phase 1 2020 - 2023Petrol190 hpBosch MG1CP777
220D (Euro 6 D-full 2021 ->...)H247 - Phase 1 2020 - 2023Diesel190 hpBosch MD1CP001
220D (Euro 6 D-temp)H247 - Phase 1 2020 - 2023Diesel194 hp
250e (1.3T)H247 - Phase 1 2020 - 2023Petrol hybrid194 hpBosch MED17.7.7
220DH247 - Phase 1 2020 - 2023Diesel194 hp
250e (1.3T)H247 - Phase 1 2020 - 2023Petrol plug-in hybrid218 hpBosch MG1CS701, Siemens/Continental EMS71
250 (2.0T)H247 - Phase 1 2020 - 2023Petrol224 hpBosch MED17.7.7, Bosch MG1CP777263 hp / 464 Nm
35 AMGH247 - Phase 1 2020 - 2023Petrol306 hpBosch MED17.7.7, Bosch MG1CP777359 hp / 504 Nm
45 AMGH247 - Phase 1 2020 - 2023Petrol381 hpBosch MED17.7.7
45 AMG -H247 - Phase 1 2020 - 2023Petrol387 hpBosch MG1CP002485 hp / 594 Nm
45 AMG-SH247 - Phase 1 2020 - 2023Petrol421 hpBosch MG1CP002470 hp / 570 Nm
45 AMG-S (Euro 6 D-full 2021 ->...)H247 - Phase 1 2020 - 2023Petrol421 hpBosch MG1CP002468 hp / 566 Nm
180 DX156 2017 - 2020Diesel109 hpSiemens/Continental SID307, Siemens/Continental SID310
180X156 2017 - 2020Petrol122 hpBosch MED17.7.2
200 D 4MaticX156 2017 - 2020Diesel136 hpDelphi CRD2, Delphi CRD3.E1, Delphi CRD3.F1
200 DX156 2017 - 2020Diesel136 hpDelphi CRD2, Delphi CRD3.E1, Delphi CRD3.F1178 hp / 395 Nm
200 D (2019 -> ...)X156 2017 - 2020Diesel136 hpDelphi CRD2, Delphi CRD3.E1, Delphi CRD3.F1
200X156 2017 - 2020Petrol156 hpBosch MED17.7.2183 hp / 322 Nm
220 DX156 2017 - 2020Diesel177 hpDelphi CRD2, Delphi CRD3.30, Delphi CRD3.40, Delphi CRD3.60, Delphi CRD3.7A, Delphi CRD3.E1, Delphi CRD3.N5
250X156 2017 - 2020Petrol211 hpBosch MED17.7.2
45 AMGX156 2017 - 2020Petrol381 hpBosch MED17.7.2442 hp / 562 Nm
180 CDIX156 2013 - 2017Diesel109 hpSiemens/Continental SID307, Siemens/Continental SID310
180 CGIX156 2013 - 2017Petrol122 hpBosch MED17.7.2
200 CDI 4 MaticX156 2013 - 2017Diesel136 hpDelphi CRD2, Delphi CRD3.30, Delphi CRD3.60
200 CDIX156 2013 - 2017Diesel136 hpDelphi CRD2, Delphi CRD3.30, Delphi CRD3.60178 hp / 395 Nm
200 CGIX156 2013 - 2017Petrol156 hpBosch MED17.7.2183 hp / 322 Nm
220 CDIX156 2013 - 2017Diesel163 hpDelphi CRD3.40, Delphi CRD3.60208 hp / 436 Nm
220 CDIX156 2013 - 2017Diesel170 hpDelphi CRD2, Delphi CRD3.60208 hp / 436 Nm
220 (2.0T)X156 2013 - 2017Petrol184 hpBosch MED17.7.2259 hp / 414 Nm
250 CGIX156 2013 - 2017Petrol211 hpBosch MED17.7.2260 hp / 416 Nm
45 AMGX156 2013 - 2017Petrol360 hpBosch MED17.7.2418 hp / 558 Nm
45 AMGX156 2013 - 2017Petrol381 hpBosch MED17.7.2440 hp / 560 Nm

Figures are indicative and depend on the vehicle’s condition, fuel quality, fitted hardware and measuring conditions.

Results vary per vehicle, and what is possible can differ per software version. This applies to every modification we deliver, for the ECU and for the TCU. Upload your original file to check what is available for your vehicle.

We walk the extra mile.

Full throttle to the solution

Continuously improving

We regularly make improvements to existing files.

Fast response times

We are easy to reach and respond quickly to all your questions.

Developed on dyno

Many of our tuning files are carefully tested on dyno and road.

We are here to help you

Our engineers are highly skilled and have many years of experience in calibrating engines and gearboxes. They are here to answer your questions.

ECUFILES engineer at work

2512 real customers worldwide

QS RACINGGuosong Huang
★★★★★

I like your team. Because we have cooperated for 4 years.

Ecufiles response: Thanks a lot for your compliment and for already working with us for the last 4 years.

Antonis Markou GarageMarkou Constantinos
★★★★★

I am very happy to meet you guys and I love working with you! Keep going !

Ecufiles response: Dear Antonis, Thanks a lot for your compliments.

All reviews

Technical Questions
For technical questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

Sales Questions
For sales questions, please register for free and submit a ticket on our platform. One of our engineers will respond to you as soon as possible during business hours.

Response time: Quick!

For sales questions, you can also reach us at:

WhatsApp: +31686247602

Response time: Moderate!

WhatsApp